TY  - JOUR
AB  - LAMINATED material from which non‐metallic bearings and gears are fabricated may consist of fabric or paper treated with a synthetic resin. In producing this material, rolls of paper or fabric are fed in at one end of an impregnator which imparts a coating of the resin varnish. The impregnated material is dried and cut into suitably sized sheets, which are placed in layers to form a block of the material. The block is next pressed by hydraulic pressure under heat. This causes the resin to soften and flow so that the paper or fabric laminations merge under the pressure, which is round about one ton per sq. in. As heating is continued, however, the resin sets and can no longer be affected by heat; the laminations lose their separate identity and the material becomes a homogeneous mass. Another type of material much in use consists of asbestos—which may or may not be in the form of asbestos cloth—likewise impregnated with synthetic resin.
VL  - 6
IS  - 1
SN  - 0036-8792
DO  - 10.1108/eb052258
UR  - https://doi.org/10.1108/eb052258
AU  - WILLIAMS A.E.
PY  - 1954
Y1  - 1954/01/01
TI  - Lubrication of NON‐METALLIC BEARINGS AND GEARS
T2  - Industrial Lubrication and Tribology
PB  - MCB UP Ltd
SP  - 20
EP  - 24
Y2  - 2024/09/19
ER  -