The Plastic Composite Package Provides an Economic Alternative To LSI‐VLSI Packaging for High Density Microcircuits

Abstract

The increase in semiconductor integration level has led to complex Integrated Circuits (ICs) characterised by an increasing number of I/O, such that dies with 40 to 84 metallised pads are currently manufactured and frequently used in modern electronic systems. The advent from 1980 onwards of these LSI‐VLSI semiconductors requires new economical micropackages to be devised that can be adapted to surface mounting techniques on Hybrid Integrated Circuits (HICs) and Printed Circuits Boards (PCBs). Plastic encapsulation using a transfer moulded epoxy resin is a widely used method for packaging silicon devices because of the reduced manufacturing cost for large volumes. This economic criterion, which is considered with widespread interest in the electronics industry, has recently led the major semiconductor manufacturers to produce Plastic Leaded Chip Carriers (PLCCs) with up to 84 J bend connections on 1·27 mm pitch, and Mini Quad Packs with 40 to 84 Z bend pins on 0·75∼0·80mm centres. However, until now, a significant number of ICs, such as full custom circuits, are not yet available in any packaged form. Thus, in order to take advantage of the compactness offered by micropackages without being under component manufacturers' constraints for packaged LSI needs, it was decided at the Microelectronics Division of CIT‐Alcatel to develop a flexible semiconductor encapsulation technology which does not require any moulding equipment. The process involved has led to the development of a small economical package with 52 peripheral Z bend leads on 0·75 mm centres which has been evaluated. This original LSI carrier, named Plastic Composite Package (PCP) because of its special feature, is perfectly suited to the specific needs of multilayer HICs for all non‐military applications. In addition, another PCP format with 68 pins on 0·635 mm centres, designed for LSI Industrial applications, has been investigated. The purpose of this paper is to explain the specific needs in the hybrid industry and to give the authors' views on trends in LSI‐VLSI plastic encapsulation. Moreover, the PCP manufacturing process is described, the evaluation results being discussed as well as the economic aspect.

Citation

Mallem, O. and Lantaires, J. (1985), "The Plastic Composite Package Provides an Economic Alternative To LSI‐VLSI Packaging for High Density Microcircuits", Microelectronics International, Vol. 2 No. 4, pp. 5-12. https://doi.org/10.1108/eb044191