To read this content please select one of the options below:

NUMERICAL STUDY OF THE EARLY STAGES OF IMPULSIVELY STARTED UNSTEADY LAMINAR FLOW PAST A SQUARE CYLINDER

T.S. LEE (Mechanical and Production Engineering Department, National University of Singapore, Singapore)
R.S. TAN (Mechanical and Production Engineering Department, National University of Singapore, Singapore)
X.P. XU (Mechanical and Production Engineering Department, National University of Singapore, Singapore)

International Journal of Numerical Methods for Heat & Fluid Flow

ISSN: 0961-5539

Article publication date: 1 August 1996

106

Abstract

The time development of the symmetrical standing zones of recirculation, which is formed in the early stages of the impulsively started laminar flow over the square cylinder, have been studied numerically. The Reynolds number considered ranges from 25 to 1,000. Main flow characteristics of the developing recirculation region aft of the square cylinder and its interaction with the separating shear layer from the leading edges are studied through the developing streamlines. Other flow characteristics are analysed in terms of pressure contours, surface pressure coefficient, wake length and drag coefficient. Four main‐flow types and three subflow types of regimes are identified through a detailed analysis of the evolution of the flow characteristics. Typically, for a given Reynolds number, it is noted that flow starts with no separation (type I main‐flow). As time advances, symmetrical standing zone of recirculation develops aft of the square cylinder (type II main‐flow). The rate of growth in width, length and structure of the aft end eddies (sub‐flow (a)) depends on the Reynolds number. In time, separated flow from the leading edges of the square cylinder also develops (type III main‐flow) and forms growing separation bubbles (sub‐flow (b)) on the upper and lower surfaces of the square cylinder. As time advances, the separation bubbles on the upper and lower surfaces of the cylinder grow towards downstream regions and eventually merge with the swelling symmetrical eddies aft of the cylinder. This merging of the type II and type III flows created a complex type IV main‐flow regime with a disturbed tertiary flow zone (sub‐flow (c)) near the merging junction. Eventually, depending on the Reynolds number, the flow develops into a particular category of symmetrical standing recirculatory flow of specific characteristics.

Keywords

Citation

LEE, T.S., TAN, R.S. and XU, X.P. (1996), "NUMERICAL STUDY OF THE EARLY STAGES OF IMPULSIVELY STARTED UNSTEADY LAMINAR FLOW PAST A SQUARE CYLINDER", International Journal of Numerical Methods for Heat & Fluid Flow, Vol. 6 No. 8, pp. 53-70. https://doi.org/10.1108/eb017557

Publisher

:

MCB UP Ltd

Copyright © 1996, MCB UP Limited

Related articles