Studies in the corrosion of some non‐ferrous alloys in 3% sodium chloride solution

P.R. Shibad (Metallurgy Division, Bhabha Atomic Research Centre, Trombay, Bombay‐74, India)
J. Balachandra (Metallurgy Division, Bhabha Atomic Research Centre, Trombay, Bombay‐74, India)

Anti-Corrosion Methods and Materials

ISSN: 0003-5599

Publication date: 1 February 1968

Abstract

The influence of variables such as temperature, agitation, oxygenation on the corrosion of aluminium, copper, nickel base alloys in 3% NaCI solution has been studied by electrochemical and weight loss measurements. It has been observed that the corrosion process is under cathodic control for all the alloys studied. Some nickel and aluminium base alloys merit consideration as a substitute for ferrous alloys in salt water under conditions similar to those reported in this paper.

Citation

Shibad, P. and Balachandra, J. (1968), "Studies in the corrosion of some non‐ferrous alloys in 3% sodium chloride solution", Anti-Corrosion Methods and Materials, Vol. 15 No. 2, pp. 16-19. https://doi.org/10.1108/eb005241

Download as .RIS

Publisher

:

MCB UP Ltd

Copyright © 1968, MCB UP Limited

Please note you might not have access to this content

You may be able to access this content by login via Shibboleth, Open Athens or with your Emerald account.
If you would like to contact us about accessing this content, click the button and fill out the form.
To rent this content from Deepdyve, please click the button.