To read this content please select one of the options below:

TWO HANDS SPEED UP DEBURRING: TWO MANIPULATORS AND A VISION SYSTEM ARE USED TO SPEED UP THE DEBURRING OF CASTINGS

Industrial Robot

ISSN: 0143-991X

Article publication date: 1 January 1991

68

Abstract

This article describes a study that has been made on the automation of deburring in a foundry. Circular castings weighing up to 20kg are deburred before delivery in order to make them fit into machining cells. The maximum production rate of the cylindrical castings on the foundry line is one casting every ten seconds. However, the castings are produced in small batches, typically ranging from 100 to 1,000. After casting and integrated sand blasting and cooling chambers, the castings are transferred further on a conveyor belt. Deburring is today done manually by lifting and pressing against different grinding and deburring machines. Bins and forklifts are used in transport and storage of castings, from production line to deburring and shipment.

Citation

Lehtinen, H., Soudunsaari, R. and Voho, P. (1991), "TWO HANDS SPEED UP DEBURRING: TWO MANIPULATORS AND A VISION SYSTEM ARE USED TO SPEED UP THE DEBURRING OF CASTINGS", Industrial Robot, Vol. 18 No. 1, pp. 19-23. https://doi.org/10.1108/eb004549

Publisher

:

MCB UP Ltd

Copyright © 1991, MCB UP Limited

Related articles