Keywords
Citation
(2004), "Corrosion testing: application and use of salt fog, humidity, cyclic, and gas tests, American Society for Testing and Materials", Anti-Corrosion Methods and Materials, Vol. 51 No. 3. https://doi.org/10.1108/acmm.2004.12851cac.007
Publisher
:Emerald Group Publishing Limited
Copyright © 2004, Emerald Group Publishing Limited
Corrosion testing: application and use of salt fog, humidity, cyclic, and gas tests, American Society for Testing and Materials
Training
Corrosion testing: application and use of salt fog, humidity, cyclic, and gas tests, American Society for Testing and Materials, 14-15 September 2004, Baltimore, MD; 2-3 November 2004, Chicago, IL
Keywords: Corrosion, Training, USA
This 2 day HANDS-ON class will provide you with a practical working knowledge of various ASTM corrosion tests. The test equipment used for this standard practice is actually present in the classroom, where you will learn how to operate the equipment and conduct the tests.
You will learn about the following.
- •
Correct application and proper performance of the standard.
- •
Terminology pertinent to the test.
- •
Chemical and physical supporting knowledge.
- •
Ingredients and solutions used in order to test properly and safely.
- •
How to operate the equipment.
- •
Collecting data properly and preparing reports.
- •
Performing on-going operator requirements and responsibilities.
- •
Utilize safety measures, methods, and procedures.
Demonstrations will include:
- •
mixing solutions;
- •
cleaning coupons and samples;
- •
evaluation of results and samples; and
- •
use of salt fog type corrosion test equipment.
Who should attend are as follows.
- •
Corrosion technicians.
- •
Product test personnel.
- •
Laboratory supervisors.
- •
Anyone who needs knowledge of ASTM corrosion tests.
ASTM Committee G01 on Corrosion of Metals developed the standards used in this course. For more information on Committee G01, contact: Len Morrissey at (610) 832-9719 or go to our G01 technical committee page.
ASTM can bring this course to your site for groups of 15 or more. On-site training courses can also be tailored to meet your specific needs.
For more information, contact: Scott Murphy. Tel: (610) 832-9685; Fax: (610) 832-9668.