Simultaneous optimization of output parameters in HPC drilling using multi response optimization technique with desirability function approach

Abstract

Purpose

This paper aims to examine an investigation of high-pressure coolant (HPC) drilling process with regard to experimental models of output parameters, effect of input parameters on output parameters and simultaneous optimization of the output parameters.

Design/methodology/approach

Experimental plan was designed using response surface method and experiments were conducted on HPC drilling set up. Measurements for output parameters were carried out and mathematical models were obtained. Multi response optimization using a composite desirability function approach was used to obtain optimum values of input parameters for simultaneous optimization of output parameters.

Findings

Optimal value of input parameters for optimization of HPC drilling process were obtained as; coolant pressure: 21 bar, spindle speed: 3,970 rpm, feed rate: 0.084 mm/rev and peck depth: 5.50 mm. The composite desirability obtained is 0.9412, which indicates that the performance of HPC drilling process was significantly optimized. Developed mathematical models of the output parameters accurately represent the entire design space under investigation.

Originality/value

This is the first study that involves variation of higher coolant pressure and investigation of HPC drilling process using response surface methodology and multi response optimization technique with desirability function.

Citation

Shete, H.V. and Sohani, M.S. (2020), "Simultaneous optimization of output parameters in HPC drilling using multi response optimization technique with desirability function approach", World Journal of Engineering, Vol. 17 No. 3, pp. 437-444. https://doi.org/10.1108/WJE-12-2018-0425