Morphology and properties of composite coating on mild steel: effect of bath temperature and snail shell weight composition
ISSN: 1708-5284
Article publication date: 1 May 2019
Issue publication date: 20 May 2019
Abstract
Purpose
This paper aims to investigate the parametric study of addition of snail shell particles (SSp) and bath temperature on the properties of Zn-ZnO-SSp composites coating.
Design/methodology/approach
Bath temperatures of 60°C and 90°C and SSp of 0, 5, 10, 15, 20 and 25g were used in the electrodeposition. The microstructure, electrochemical, wear and hardness values of the coated samples were determined.
Findings
Highest coating thickness of 240 µm, 277 per cent improvement in hardness values, 66.67 per cent improvement of wear rate were obtained at bath temperature of 60oC and 15gSSp addition over that of the uncoated sample. There was improvement in corrosion resistance after composites coating. Maximum improvement in the properties was obtained at bath temperature of 60°C at 15gSSp addition.
Originality/value
It has been established in this work that bath treatment and SSps improved the properties of the developed coating.
Keywords
Acknowledgements
Funding: This research received no specific grant from any funding agency in the public, commercial or not-for-profit sectors.
Disclosure statement: There is no conflict of interest to be disclosed in this research.
Citation
Aigbodion, V.S., C.C., E., E.T., A., I.Y., S., I.C., E. and C.A., M. (2019), "Morphology and properties of composite coating on mild steel: effect of bath temperature and snail shell weight composition", World Journal of Engineering, Vol. 16 No. 2, pp. 296-303. https://doi.org/10.1108/WJE-07-2018-0232
Publisher
:Emerald Publishing Limited
Copyright © 2019, Emerald Publishing Limited