Finite element analysis of CFRP-externally strengthened reinforced concrete beams subjected to three-point bending

Abstract

Purpose

This paper aims to develop a non-linear finite element model predicting the response of externally strengthened beams under a three-point flexure test.

Design/methodology/approach

The ANSYS software is used for modeling. SOILD65, LINK180, SHELL181 and SOLID185 elements are used, respectively, to model concrete, steel reinforcement, polymer and steel plate support. A parametric study was carried out. The effects of compressive strength, Young’s modulus, layers number and carbon fiber-reinforced polymer thickness on beam behavior are analyzed. A comparative study between the non-linear finite element and analytical models, including the ACI 440.2 R-08 model, and experimental data is also carried out.

Findings

A comparative study of the non-linear finite element results with analytical models, including the ACI 440.2 R-08 model and experimental data for different parameters, shows that the strengthened beams possessed better resistance to cracks. In general, the finite element model’s results are in good agreement with the experimental test data.

Practical implications

This model will predict the strengthened beams behavior and can describe the beams physical conditions, yielding the results that can be interpreted in the structural study context without using a laboratory testing.

Originality/value

On the basis of the results, a good match is found between the model results and experimental data at all stages of loading the tested samples. Crack models obtained in the non-linear finite element model in the beams are also presented. The submitted finite element model can be used to predict the behavior of the reinforced concrete beam. Also, the comparative study between an analytical model proposed by of current code of ACI 440.2 R-08 and finite element analysis is investigated.

Citation

Barour, S., Zergua, A., Bouziadi, F. and Abed Jasim, W. (2020), "Finite element analysis of CFRP-externally strengthened reinforced concrete beams subjected to three-point bending", World Journal of Engineering, Vol. 17 No. 2, pp. 183-202. https://doi.org/10.1108/WJE-04-2019-0121