Influence of thermal cycling on reliability of solder joints executed on long and metal core PCBs

Abstract

Purpose

The purpose of this paper is to evaluate the reliability of solder joints made on long FR-4 and metal core printed circuit boards using the accelerated thermal cycling.

Design/methodology/approach

Solder joints of diodes and resistors samples made on long FR-4 and aluminum (Al) core printed circuit boards were examined. Two kinds of solder pastes were used for the samples preparation. All samples were subjected to temperature aging cycles (−40°C – 3 hours/+85°C – 3 hours). Solder joints resistance, X-Ray inspection and metallographic cross-sections for samples as received and after 100, 500 and 1,000 hours of thermal cycles were utilized for solder joints assessment.

Findings

It was stated that 1,000 hours of thermal cycles were enough to show reliability problems in solder joints on long and/or AL core printed circuit board assembly (PCBA). The solder joints of R1206 components were the most sensitive reliability elements. The solder joints of LED diodes are more reliable than solder joints of R1206 resistors. Solder joints made on FR-4 substrate were about two times more reliable than ones on AL core substrate. Cracks in solder joints were the visible reason of solder joints failures.

Originality/value

The influence of thermal cycles on the reliability of solder joints on long, FR-4 and metal core printed circuit boards were presented. Findings from this paper can be used for planning of reliability trials during validation of reflow processes of products containing long or long metal core printed circuit boards (PCBs).

Citation

Sitek, J., Araźna, A., Janeczek, K., Stęplewski, W., Lipiec, K., Futera, K. and Ciszewski, P. (2015), "Influence of thermal cycling on reliability of solder joints executed on long and metal core PCBs", Soldering & Surface Mount Technology, Vol. 27 No. 3, pp. 120-124. https://doi.org/10.1108/SSMT-03-2015-0009