Cantilever enhanced based photoacoustic detection of SF₆ decomposition component SO₂ using UV LED

Abstract

Purpose

This paper aims to establish a photoacoustic detection system for SO₂ using UV-LED and testify its feasibility for sensitive measurement. The work in this paper can avoid potential crossover interference in infrared (IR) range and also balance the capability and cost of feasible excitation for photoacoustic detection system.

Design/methodology/approach

In this experimental work, a cantilever-enhanced–based photoacoustic SO₂ detection system using an ultraviolet (UV) LED light source with a light power of 4 mW as the excitation was established.

Findings

A feasible photoacoustic detection system for SO₂ using UV-LED was established. Experimental results demonstrate that the detection limit of the system can reach the level of 0.667 ppm, which can serve as a reference for the application of PAS in insulation fault diagnosis.

Originality/value

This work investigated the potential of using ultraviolet photoacoustic spectroscopy to detect trace SO₂, which provided an ideal replacement of infrared-laser-based detection system. In this paper, a photoacoustic detection system using LED with a low light power was established. Low light power requirement can expand the options of light sources accordingly. In this paper, the absorption characteristics of SO₂ in the presented detection system and ultraviolet range were studied. And the detection limit of the presented system was given. Both of which can provide reference to SO₂ detection in ambient SF₆.

Citation

Chen, T., Ma, F., Zhao, Y., Liao, Z., Qiu, Z. and Zhang, G. (2022), "Cantilever enhanced based photoacoustic detection of SF₆ decomposition component SO₂ using UV LED", Sensor Review, Vol. 42 No. 1, pp. 70-75. https://doi.org/10.1108/SR-12-2020-0292