TY  - JOUR
AB  - Purpose The main aim of the study was to measure the cutting forces and chip shapes based on different machining parameters.Design/methodology/approach To get the best optimal machining conditions, it is essential to use the best combination of machining parameters. Although some machining parameters are not important for the process, there are machining parameters which are very important for the machining process.Findings It is essential to determine which machining parameters are the most dominant to make the optimal machining conditions.Originality/value Six different chip shapes are obtained according to ISO standardization. It was determined that the different cutting forces occurred for the different chip shapes.
VL  - 38
IS  - 3
SN  - 0260-2288
DO  - 10.1108/SR-08-2017-0169
UR  - https://doi.org/10.1108/SR-08-2017-0169
AU  - Anicic Obrad
AU  - Jovic Srdjan
AU  - Camagic Ivica
AU  - Radojkovic Mladen
AU  - Stanojevic Nenad
PY  - 2018
Y1  - 2018/01/01
TI  - Measuring of cutting forces and chip shapes based on different machining parameters
T2  - Sensor Review
PB  - Emerald Publishing Limited
SP  - 387
EP  - 390
Y2  - 2024/05/14
ER  -