TY  - JOUR
AB  - Purpose The main purpose of the study was to analyze the relationship between cutting forces and tool wear during turning of steel 30CrNiMo8.Design/methodology/approach It is very important to find the optimal machining conditions to increase the tool life and to improve product quality. Width of tool wear was measured by universal microscope.Findings During experimental procedure, one chip shape was obtained for the given machining parameters. Results showed negligible tool wear for the given experimental conditions. In other words, the tool wear is negligible for one chip shape.Originality/value To increase tool wear, there are different chip shapes.
VL  - 38
IS  - 2
SN  - 0260-2288
DO  - 10.1108/SR-07-2017-0147
UR  - https://doi.org/10.1108/SR-07-2017-0147
AU  - Anicic Obrad
AU  - Jovic Srdjan
AU  - Stanojevic Nenad
AU  - Marsenic Mladen
AU  - Pejovic Branko
AU  - Nedic Bogdan
PY  - 2018
Y1  - 2018/01/01
TI  - Estimation of tool wear according to cutting forces during machining procedure
T2  - Sensor Review
PB  - Emerald Publishing Limited
SP  - 176
EP  - 180
Y2  - 2024/04/25
ER  -