To read this content please select one of the options below:

Signal filtering for a small-diameter, dual-axis FOG inclinometer

Chunhua Ren (Key Laboratory of Opto-Electronic Technology and System, Ministry of Education, Chongqing University, Chongqing, China)
Xiaoming Hu (Key Laboratory of Opto-Electronic Technology and System, Ministry of Education, Chongqing University, Chongqing, China)
Poyun Qin (Key Laboratory of Opto-Electronic Technology and System, Ministry of Education, Chongqing University, Chongqing, China)
Leilei Li (Key Laboratory of Opto-Electronic Technology and System, Ministry of Education, Chongqing University, Chongqing, China)
Tong He (Chongqing Aerospace New Century Satellite Application Technology Co., Ltd., Chongqing, China)

Sensor Review

ISSN: 0260-2288

Article publication date: 1 February 2018

Issue publication date: 24 May 2018

104

Abstract

Purpose

Measurement-while-drilling (MWD) system has been used to provide trajectory and inclination parameters of the oil and gas well. Fluxgate magnetometer is a traditional choice for one MWD system; however, it cannot obtain effective trajectory parameters in nonmagnetic environments. Fiber-optic-gyroscope (FOG) inclinometer system is a favorable substitute of fluxgate magnetometer, which can avoid the flaws associated with magnetic monitoring devices. However, there are some limitations and increasing surveying errors in this system under high impact conditions. This paper aims to overcome these imperfections of the FOG inclinometer system.

Design/methodology/approach

To overcome the imperfections, filtering algorithms are used to improve the precision of the equipment. The authors compare the low-pass filtering algorithm with the wavelet de-noising algorithm applied to real experimental data. Quantitative comparison of the error between the true and processed signal revealed that the wavelet de-noising method outperformed the low-pass filtering method. To achieve optimal positioning effects, the wavelet de-noising algorithm is finally used to inhibit the interference caused by the impact.

Findings

The experimental results show that the method proposed can ensure the azimuth accuracy lower than ±2 degrees and the inclination accuracy lower than ± 0.15 degrees under the condition of interval impact. The method proposed can overcome the interference generated by the impact in the well, which makes the instrument suitable for the measurement of small-diameter casing well.

Originality/value

After conducting the wavelet threshold filtering on the raw data of accelerometers, the noise generated by the impact is successfully suppressed, which is expected to meet the special requirement of the down-hole survey environment.

Keywords

Acknowledgements

This project is supported by the Basic and Frontier Research Foundation of Chongqing, Project Number : “CSTC2016JCYJA0331”.

Citation

Ren, C., Hu, X., Qin, P., Li, L. and He, T. (2018), "Signal filtering for a small-diameter, dual-axis FOG inclinometer", Sensor Review, Vol. 38 No. 3, pp. 353-359. https://doi.org/10.1108/SR-07-2017-0136

Publisher

:

Emerald Publishing Limited

Copyright © 2018, Emerald Publishing Limited

Related articles