To read this content please select one of the options below:

Fabrication and performance evaluation of two multi-layer passive micromixers

Xueye Chen (Liaoning University of Technology, Jinzhou, China)
Jienan Shen (Liaoning University of Technology, Jinzhou, China)
Zengliang Hu (Liaoning University of Technology, Jinzhou, China)

Sensor Review

ISSN: 0260-2288

Article publication date: 8 January 2018

Issue publication date: 24 May 2018

177

Abstract

Purpose

The purpose of this study is to provide a micromixer for achieving effective mixing of two liquids. The mixing of two liquids is difficult to achieve in microfluidic chips because they cannot form turbulence at small dimensions and velocities.

Design/methodology/approach

In this paper, four kinds of passive micromixers based on splitting–recombination and chaotic convection are compared. First, a better E-shape mixing unit based on the previous F-shape mixing unit has been designed. Then, the E-shape mixing units are further combined to form three micromixers (i.e. E-mixer, SESM and FESM).

Findings

Finally, the mixing experimental results show that the mixing indexes of E-mixer, SESM and FESM are more than those of F-mixer when the Reynolds number range is from 0.5 to 100. And at Re = 15, the lowest mixing index of E-mixer is 71%, which is the highest of the four micromixers.

Originality/value

At Re = 80, the highest mixing index of F-mixer and E-mixer is 92 and 94 per cent, respectively, and then it begins to decrease. But the mixing index of SESM and FESM remains close to 100 per cent.

Keywords

Acknowledgements

This work was supported by Key Project of Department of Education of Liaoning Province (JZL201715401).

Citation

Chen, X., Shen, J. and Hu, Z. (2018), "Fabrication and performance evaluation of two multi-layer passive micromixers", Sensor Review, Vol. 38 No. 3, pp. 321-325. https://doi.org/10.1108/SR-04-2017-0054

Publisher

:

Emerald Publishing Limited

Copyright © 2018, Emerald Publishing Limited

Related articles