To read this content please select one of the options below:

Dynamic structural health monitoring of a civil engineering structure with a POF accelerometer

Paulo Costa Antunes (Instituto de Telecomunicações and Departamento de Física da Universidade de Aveiro, Universidade de Aveiro, Aveiro, Portugal)
João Miguel Dias (Departamento de Física da Universidade de Aveiro, Universidade de Aveiro, Aveiro, Portugal)
Humberto Varum (Departamento de Engenharia Civil da Universidade de Aveiro, Universidade de Aveiro, Aveiro, Portugal)
Paulo André (Instituto de Telecomunicações and Departamento de Física da Universidade de Aveiro, Universidade de Aveiro, Aveiro, Portugal)

Sensor Review

ISSN: 0260-2288

Article publication date: 14 January 2014

632

Abstract

Purpose

In this work, the paper aims to demonstrate the feasibility of plastic optical fiber (POF) based accelerometers for the structural health monitoring (SHM) of civil engineering structures based on measurements of their dynamic response, namely to estimate natural frequencies. These sensors use POFs, combining the advantages of the optical technology with the robustness of this particular kind of fiber. The POF sensor output is directly compared with the signal from an electrical sensor, demonstrating the potential use of such sensors in structural monitoring applications.

Design/methodology/approach

Within this work, the paper demonstrates the feasibility of using a low-cost acceleration system based on a POF accelerometer on the dynamic monitoring of a civil engineering structure, aiming its natural frequency evaluation, which is a primary parameter to be used in SHM methods and numerical models calibration.

Findings

A low-cost POF-based accelerometer was used in the characterization of a civil engineering structural component, located in a building at the University of Aveiro Campus, being used to estimate its natural frequency with a relative error of 0.36 percent, comparatively to the value estimated recurring to a calibrated electronic sensor.

Originality/value

Optical fiber sensors take advantage of the fibers properties, such as immunity to electromagnetic interference and electrical isolation. They are very attractive for use in hostile environments, like submerse environments or flammable atmospheres where electrical currents might pose a hazard. The advantages of POF itself should also be considered, like resistance to hash environments, robustness, flexibility, low-cost interrogation units and high numeric aperture (lower cost components). The paper demonstrates the feasibility of using a low-cost acceleration system based on a POF accelerometer on the dynamic monitoring of a civil engineering structure, aiming its natural frequency evaluation.

Keywords

Acknowledgements

Paulo Costa Antunes gratefully acknowledges the financial support from Fundação para a Ciência e a Tecnologia (FCT), through the postdoctoral fellowship SFRH/BPD/76735/2011.

Citation

Costa Antunes, P., Miguel Dias, J., Varum, H. and André, P. (2014), "Dynamic structural health monitoring of a civil engineering structure with a POF accelerometer", Sensor Review, Vol. 34 No. 1, pp. 36-41. https://doi.org/10.1108/SR-04-2013-656

Publisher

:

Emerald Group Publishing Limited

Copyright © 2014, Emerald Group Publishing Limited

Related articles