TY - JOUR AB - Purpose– The purpose of this paper is to evaluate the use of a simple printed geometry to estimate mechanical properties (elastic modulus, yield strength) with inexpensive test equipment. Design/methodology/approach– Test geometry is presented that enables controlled strains with manual deformation and repeatable measurement of vibrational frequencies. This is tested with multiple fused deposition modeling (FDM) machines to assess measurement accuracy and repeatability. Printing orientation and some printing parameters are varied to assess the measurement sensitivity. Findings– The test methods show good correlation with manufacturer material specifications in the X-Y plane and reported elastic strain limits. It is also sensitive to printing orientation and printing parameters. Research limitations/implications– Further work is needed to assess the sensitivity of the method to particular defects and parameter errors expected in particular applications. Originality/value– This method supports process monitoring in production environments and inexpensive assessments of material properties for hobbyist and do-i- yourself users. While it is tested with FDM, it should be applicable to other additive manufacturing processes. VL - 21 IS - 2 SN - 1355-2546 DO - 10.1108/RPJ-12-2014-0170 UR - https://doi.org/10.1108/RPJ-12-2014-0170 AU - Katz Andrew AU - Nussbaum Justin AU - Lusk Craig P AU - Crane Nathan B PY - 2015 Y1 - 2015/01/01 TI - Stress-limiting test structures for rapid low-cost strength and stiffness assessment T2 - Rapid Prototyping Journal PB - Emerald Group Publishing Limited SP - 144 EP - 151 Y2 - 2024/03/28 ER -