To read this content please select one of the options below:

Effect of weld power and build compliance on ultrasonic consolidation

Adam Hehr (Department of Mechanical and Aerospace Engineering, The Ohio State University, Columbus, Ohio, USA)
Paul J. Wolcott (Department of Mechanical and Aerospace Engineering, The Ohio State University, Columbus, Ohio, USA)
Marcelo J. Dapino (Department of Mechanical and Aerospace Engineering, The Ohio State University, Columbus, Ohio, USA)

Rapid Prototyping Journal

ISSN: 1355-2546

Article publication date: 21 March 2016

393

Abstract

Purpose

Ultrasonic additive manufacturing (UAM) is a fabrication technology based on ultrasonic metal welding. As a solid-state process, temperatures during UAM fabrication reach a fraction of the melting temperatures of the participating metals. UAM parts can become mechanically compliant during fabrication, which negatively influences the ability of the welder to produce consistent welds. This study aims to evaluate the effect of weld power on weld quality throughout a UAM build, and develop a new power-compensation approach to achieve homogeneous weld quality.

Design/methodology/approach

The study utilizes mechanical push-pin testing as a metric of delamination resistance, as well as focused ion beam and scanning electron microscopy to analyze the interface microstructure of UAM parts.

Findings

Weld power was found to negatively affect mechanical properties and microstructure. By keeping weld power constant, the delamination energy of UAM coupons was increased 22 per cent along with a consistent grain structure. As a result, to ensure constant properties throughout UAM component construction, maintaining weld power is preferable over the conventional strategy based on amplitude control.

Research limitations/implications

Further characterization could be conducted to evaluate the power control strategy on other material combinations, though this study strongly suggests that the proposed approach should work regardless of the metals being welded.

Practical implications

The proposed power control strategy can be implemented by monitoring and controlling the electrical power supplied to the welder. As such, no additional hardware is required, making the approach both useful and straightforward to implement.

Originality/value

This research paper is the first to recognize and address the negative effect of build compliance on weld power input in UAM. This is also the first paper to correlate measured weld power with the microstructure and mechanical properties of UAM parts.

Keywords

Acknowledgements

Support for A.H. comes from a National Science Foundation Graduate Fellowship, grant No. 1102690. Any opinions, findings and conclusions or recommendations expressed in this material are those of the author(s) and do not necessarily reflect the views of the National Science Foundation. The UAM system utilized in this study was funded by the Ohio Development Services Agency, grant TECH 12-067. The technical assistance of David Tung, Ed Pfeifer and Dan Huber (OSU) is acknowledged.

Citation

Hehr, A., Wolcott, P.J. and Dapino, M.J. (2016), "Effect of weld power and build compliance on ultrasonic consolidation", Rapid Prototyping Journal, Vol. 22 No. 2, pp. 377-386. https://doi.org/10.1108/RPJ-11-2014-0147

Publisher

:

Emerald Group Publishing Limited

Copyright © 2016, Emerald Group Publishing Limited

Related articles