PLA conductive filament for 3D printed smart sensing applications

Abstract

Purpose

This paper aims to present a study on a commercial conductive polylactic acid (PLA) filament and its potential application in a three-dimensional (3D) printed smart cap embedding a resistive temperature sensor made of this material. The final aim of this study is to add a fundamental block to the electrical characterization of printed conductive polymers, which are promising to mimic the electrical performance of metals and semiconductors. The studied PLA filament demonstrates not only to be suitable for a simple 3D printed concept but also to show peculiar characteristics that can be exploited to fabricate freeform low-cost temperature sensors.

Design/methodology/approach

The first part is focused on the conductive properties of the PLA filament and its temperature dependency. After obtaining a resistance temperature characteristic of this material, the same was used to fabricate a part of a 3D printed smart cap.

Findings

An approach to the characterization of the 3D printed conductive polymer has been presented. The major results are related to the definition of resistance vs temperature characteristic of the material. This model was then exploited to design a temperature sensor embedded in a 3D printed smart cap.

Practical implications

This study demonstrates that commercial conductive PLA filaments can be suitable materials for 3D printed low-cost temperature sensors or constitutive parts of a 3D printed smart object.

Originality/value

The paper clearly demonstrates that a new generation of 3D printed smart objects can already be obtained using low-cost commercial materials.

Citation

Marasso, S.L., Cocuzza, M., Bertana, V., Perrucci, F., Tommasi, A., Ferrero, S., Scaltrito, L. and Pirri, C.F. (2018), "PLA conductive filament for 3D printed smart sensing applications", Rapid Prototyping Journal, Vol. 24 No. 4, pp. 739-743. https://doi.org/10.1108/RPJ-09-2016-0150