To read the full version of this content please select one of the options below:

Towards the development of a smart fused filament fabrication system using multi-sensor data fusion for in-process monitoring

Michele Moretti (Department of Engineering, Universita degli Studi di Perugia, Perugia, Italy)
Federico Bianchi (Department of Engineering, Universita degli Studi di Perugia, Perugia, Italy)
Nicola Senin (Department of Engineering, Universita degli Studi di Perugia, Perugia, Italy)

Rapid Prototyping Journal

ISSN: 1355-2546

Article publication date: 26 June 2020

Abstract

Purpose

This paper aims to illustrate the integration of multiple heterogeneous sensors into a fused filament fabrication (FFF) system and the implementation of multi-sensor data fusion technologies to support the development of a “smart” machine capable of monitoring the manufacturing process and part quality as it is being built.

Design/methodology/approach

Starting from off-the-shelf FFF components, the paper discusses the issues related to how the machine architecture and the FFF process itself must be redesigned to accommodate heterogeneous sensors and how data from such sensors can be integrated. The usefulness of the approach is discussed through illustration of detectable, example defects.

Findings

Through aggregation of heterogeneous in-process data, a smart FFF system developed upon the architectural choices discussed in this work has the potential to recognise a number of process-related issues leading to defective parts.

Research limitations/implications

Although the implementation is specific to a type of FFF hardware and type of processed material, the conclusions are of general validity for material extrusion processes of polymers.

Practical implications

Effective in-process sensing enables timely detection of process or part quality issues, thus allowing for early process termination or application of corrective actions, leading to significant savings for high value-added parts.

Originality/value

While most current literature on FFF process monitoring has focused on monitoring selected process variables, in this work a wider perspective is gained by aggregation of heterogeneous sensors, with particular focus on achieving co-localisation in space and time of the sensor data acquired within the same fabrication process. This allows for the detection of issues that no sensor alone could reliably detect.

Keywords

Acknowledgements

MM, FB and NS thank Dr Alberto Garinei and the company Idea-re S.R.L. (www.idea-re.eu/) for providing support through a collaborative grant from the Regional Operating Programme of European Social Funding (POR FSE) Umbria 2014-2020. The authors also wish to thank Dr. Silvia Falcinelli and Dr. Emanuele Antonini for providing useful insight.

Citation

Moretti, M., Bianchi, F. and Senin, N. (2020), "Towards the development of a smart fused filament fabrication system using multi-sensor data fusion for in-process monitoring", Rapid Prototyping Journal, Vol. 26 No. 7, pp. 1249-1261. https://doi.org/10.1108/RPJ-06-2019-0167

Publisher

:

Emerald Publishing Limited

Copyright © 2020, Emerald Publishing Limited