To read this content please select one of the options below:

Thermo-fluid flow behavior of the IN718 molten pool in the laser directed energy deposition process under magnetic field

Yang Zhou (School of Mechatronics Engineering, Harbin Institute of Technology, Harbin, China and Department of Mechanical and Energy Engineering, Southern University of Science and Technology, Shenzhen, China)
Wenying Qu (Department of Mechanical and Energy Engineering, Southern University of Science and Technology, Shenzhen, China and Shenzhen Key Laboratory for Additive Manufacturing of High-Performance, Southern University of Science and Technology, Shenzhen, China)
Fan Zhou (Department of Mechanical and Energy Engineering, Southern University of Science and Technology, Shenzhen, China)
Xinggang Li (Academy for Advanced Interdisciplinary Studies, Southern University of Science and Technology, Shenzhen, China)
Lijun Song (State Key Laboratory of Advanced Design and Manufacturing for Vehicle Body, Hunan University, Changsha, China)
Qiang Zhu (Department of Mechanical and Energy Engineering, Southern University of Science and Technology, Shenzhen, China and Shenzhen Key Laboratory for Additive Manufacturing of High-Performance, Southern University of Science and Technology, Shenzhen, China)

Rapid Prototyping Journal

ISSN: 1355-2546

Article publication date: 13 October 2022

Issue publication date: 2 March 2023

248

Abstract

Purpose

This paper aims to understand the magnetohydrodynamics (MHD) mechanism in the molten pool under different modes of magnetic field. The comparison focuses on the Lorenz force excitation and its effect on the melt flow and solidification parameters, intending to obtain practical references for the design of magnetic field-assisted laser directed energy deposition (L-DED) equipment.

Design/methodology/approach

A three-dimensional transient multi-physical model, coupled with MHD and thermodynamic, was established. The dimension and microstructure of the molten pool under a 0T magnetic field was used as a benchmark for accuracy verification. The interaction between the melt flow and the Lorenz force is compared under a static magnetic field in the X-, Y- and Z-directions, and also an oscillating and alternating magnetic field.

Findings

The numerical results indicate that the chaotic fluctuation of melt flow trends to stable under the magnetostatic field, while a periodically oscillating melt flow could be obtained by applying a nonstatic magnetic field. The Y and Z directional applied magnetostatic field shows the effective damping effect, while the two nonstatic magnetic fields discussed in this paper have almost the same effect on melt flow. Since the heat transfer inside the molten pool is dominated by convection, the application of a magnetic field has a limited effect on the temperature gradient and solidification rate at the solidification interface due to the convection mode of melt flow is still Marangoni convection.

Originality/value

This work provided a deeper understanding of the interaction mechanism between the magnetic field and melt flow inside the molten pool, and provided practical references for magnetic field-assisted L-DED equipment design.

Keywords

Acknowledgements

The authors acknowledge the financial support from the Shenzhen Science and Technology Innovation Committee, Shenzhen, China [Project Nos. KQTD20170328154443162 and JCYJ20210324104610029]. The work has been supported by the Center for Computational Science and Engineering at Southern University of Science and Technology, Shenzhen, China.

Citation

Zhou, Y., Qu, W., Zhou, F., Li, X., Song, L. and Zhu, Q. (2023), "Thermo-fluid flow behavior of the IN718 molten pool in the laser directed energy deposition process under magnetic field", Rapid Prototyping Journal, Vol. 29 No. 3, pp. 460-473. https://doi.org/10.1108/RPJ-05-2022-0143

Publisher

:

Emerald Publishing Limited

Copyright © 2022, Emerald Publishing Limited

Related articles