Advanced
search

To read this content please select one of the options below:

Preparation of optimum degreasing–sintering process for metal–polymer blending low temperature 3D printing

Chuansheng Wang (College of Mechanical and Electrical Engineering, Qingdao University of Science and Technology, Qingdao, China, and Key Laboratory of Advanced Manufacturing Technology of Polymer Materials Qingdao, University of Science and Technology, Qingdao, China)
Ning Cai (College of Mechanical and Electrical Engineering, Qingdao University of Science and Technology, Qingdao, China, and Key Laboratory of Advanced Manufacturing Technology of Polymer Materials Qingdao, University of Science and Technology, Qingdao, China)
Dewei Zhang (College of Mechanical and Electrical Engineering, Qingdao University of Science and Technology, Qingdao, China, and Key Laboratory of Advanced Manufacturing Technology of Polymer Materials Qingdao, University of Science and Technology, Qingdao, China)
Jinxiu Zhang (College of Mechanical and Electrical Engineering, Qingdao University of Science and Technology, Qingdao, China, and Key Laboratory of Advanced Manufacturing Technology of Polymer Materials Qingdao, University of Science and Technology, Qingdao, China)
Tianhao Chang (College of Mechanical and Electrical Engineering, Qingdao University of Science and Technology, Qingdao, China, and Key Laboratory of Advanced Manufacturing Technology of Polymer Materials Qingdao, University of Science and Technology, Qingdao, China)
Shaoming Li (College of Mechanical and Electrical Engineering, Qingdao University of Science and Technology, Qingdao, China, and Key Laboratory of Advanced Manufacturing Technology of Polymer Materials Qingdao, University of Science and Technology, Qingdao, China)
Yuqi Chao (College of Mechanical and Electrical Engineering, Qingdao University of Science and Technology, Qingdao, China, and Key Laboratory of Advanced Manufacturing Technology of Polymer Materials Qingdao, University of Science and Technology, Qingdao, China)
Jiquan Hu (College of Mechanical and Electrical Engineering, Qingdao University of Science and Technology, Qingdao, China, and Key Laboratory of Advanced Manufacturing Technology of Polymer Materials Qingdao, University of Science and Technology, Qingdao, China)

Rapid Prototyping Journal

ISSN: 1355-2546

Article publication date: 30 November 2018

Issue publication date: 16 April 2019

278

Abstract

Purpose

This purpose of this study was to develop a 3D printer based on powder particle. The best degreasing and sintering process of a blank body was investigated to obtain a metal product with high precision and high surface finish. This process will greatly reduce the difficulty and cost of forming a complex metal product with high application value.

Design/methodology/approach

Stainless steel powder and polymer materials were mixed using a rubber mixing machine. The powders were granulated to prepare a mixed material. A powder feed 3D printer was used at low temperature (about 200°C) to print and degrease the body. A series of sintering experiments were performed to study the different sintering temperatures, and the physical and mechanical properties of the sample sintered under various conditions were compared to determine the best degreasing and sintering process.

Findings

The reaction at 1,370°C was the optimal route for the metal billet degreasing. The resulting metal products had fine structure and stable performance compared with the products with traditional powder metallurgy composition.

Originality/value

Most 3D printed metal powder materials rely on imports, which are expensive and increase the manufacturing cost. These drawbacks limit the application and development of metal 3D printing technology to a certain extent. The successful study of this molding method greatly reduces the difficulty and cost of forming complex metal products with high application value. This report will provide valuable guidance for sintering process and forming methods.

Keywords

Citation

Wang, C., Cai, N., Zhang, D., Zhang, J., Chang, T., Li, S., Chao, Y. and Hu, J. (2019), "Preparation of optimum degreasing–sintering process for metal–polymer blending low temperature 3D printing", Rapid Prototyping Journal, Vol. 25 No. 3, pp. 515-529. https://doi.org/10.1108/RPJ-03-2018-0071

Publisher

:

Emerald Publishing Limited

Copyright © 2018, Emerald Publishing Limited

Related articles

Manage cookies

We’re listening — tell us what you think

Join us on our journey