Study on the Dyed Cotton Fibers Damage in Spinning Processes and its Effect on the Cotton Mélange Yarn Properties

Abstract

Grey cotton fibers with a mean fiber length and fineness of 29 mm and 4.2 micronair was pretreated, scoured and dyed. Three ring yarns were spun separately from 100% grey cotton (R.R.Y.), 50% dyed and 50% grey cotton blend (M.R.Y.) and 100% dyed cotton (D.R.Y.). The extent of fiber damage was assessed by measuring the length and the mechanical characteristics of cotton fibers after passing the fibers through the lap machine and the draw frame II. Properties of R.R.Y., M.R.Y. and D.R.Y. samples were examined. In terms of tenacity and elongation at break, grey and dyed cotton fibers, which were selected after being processed by the lap machine and the draw frame II, were very similar. The fiber length by number and weight of grey cotton was longer than that of dyed cotton, while the amount of fiber nep and short fiber content of dyed cotton were more than those of grey cotton.

The three yarn samples were the same in terms of elongation at break. The tenacity of R.R.Y. was the highest but the yarn sample was the lowest in terms of coefficients of mass variation (Cv%), imperfection and hairiness in comparison with the M.R.Y. and D.R.Y. samples.

Citation

Moghassem, A.R. (2008), "Study on the Dyed Cotton Fibers Damage in Spinning Processes and its Effect on the Cotton Mélange Yarn Properties", Research Journal of Textile and Apparel, Vol. 12 No. 1, pp. 71-78. https://doi.org/10.1108/RJTA-12-01-2008-B009