Advanced
search

To read this content please select one of the options below:

Measurement of Garment Bagging Deformation Using a 3D Laser Scanning Method

Laikuen Chan (Institute of Textiles and Clothing, The Hong Kong Polytechnic University, Hung Hom, Kowloon, Hong Kong, China Email: )
Mansang Wong (Department of Health Technology and Informatics, The Hong Kong Polytechnic University)
Zhenge Dong (Institute of Textiles and Clothing, The Hong Kong Polytechnic University, Hung Hom, Kowloon, Hong Kong, China)
Jinlian Hu (Institute of Textiles and Clothing, The Hong Kong Polytechnic University, Hung Hom, Kowloon, Hong Kong, China)
Siuping Chung (Institute of Textiles and Clothing, The Hong Kong Polytechnic University, Hung Hom, Kowloon, Hong Kong, China)

Research Journal of Textile and Apparel

ISSN: 1560-6074

Article publication date: 1 May 2006

44

Abstract

Garment bagging is considered as a 3D distortion happened over cyclic movement and/or prolonged stretching of fabric materials. In this study, a laser scanning system was proposed for a 3D measurement of garment bagging and the advantages of this technique over conventional methods were revealed. A surface inspection method for garment bagging was developed; simple boundary filter, pick peaks tool, 5 point FFT smoothing and polynomial fit were applied to detect and measure the borderline of bagging deformation conditions. The 3D information of bagging shape, including bagging height, could be obtained through this technique.

Keywords

Citation

Chan, L., Wong, M., Dong, Z., Hu, J. and Chung, S. (2006), "Measurement of Garment Bagging Deformation Using a 3D Laser Scanning Method", Research Journal of Textile and Apparel, Vol. 10 No. 2, pp. 10-18. https://doi.org/10.1108/RJTA-10-02-2006-B002

Publisher

:

Emerald Group Publishing Limited

Copyright © 2006 Emerald Group Publishing Limited

Related articles

Manage cookies

We’re listening — tell us what you think

Join us on our journey