Dref-3 yarn structure with plied staple fibrous core

Abstract

Purpose

Dref-3 friction spun core yarns produced using staple fibre yarn as the core, e.g. Jute core yarn wrapped with cotton fibre, have poorer mechanical properties compared to the core yarn itself. The purpose of this study was to understand the structure of such yarns, that will lead to the optimization of fibre, machine and process variables for production of better quality yarn from the Dref-3/3000 machines.

Design/methodology/approach

The Dref spinning trials were conducted following a full factorial design with six variables, all with two operative levels. The Dref-3 friction spun yarn, in which the core is a plied, twisted ring yarn composed of cotton singles and the sheath, formed from the same cotton fibres making the singles, has been examined. The structures have also been studied by using the tracer fibre technique.

Findings

It was observed that rather than depending on the plied core yarn, the tensile properties of the Dref-3 yarn are significantly determined by the parameters those affect the constituent single yarn tensile properties, i.e. the amount of twist and its twist direction, yarn linear density and the sheath fibre proportion used during the Dref spinning in making the final yarn. Further, when the twist direction of single yarn, double yarn and the Dref spinning false twisting are in the same direction, the produced core-sheath yarn exhibits better tensile properties.

Practical implications

The understanding of the yarn structure will lead to optimized production of all staple fibre core Dref spun yarns.

Social implications

The research work may lead to utilization of coarse and harsh untapped natural fibres to the production of value-added textile products.

Originality/value

Though an earlier research has reported the effects of sheath fibre fineness and length on the tensile and bending properties of Dref-3 friction yarn, the present study is the first documented attempt using the tracer fibre technique to understand Dref-3 yarn structure with plied staple fibrous core.

Citation

Bhowmick, M., Rakshit, A.K. and Chattopadhyay, S.K. (2018), "Dref-3 yarn structure with plied staple fibrous core", Research Journal of Textile and Apparel, Vol. 22 No. 3, pp. 235-246. https://doi.org/10.1108/RJTA-09-2017-0044