To read this content please select one of the options below:

Eli-Twist sewing thread – an alternative to conventional thread

Madan Lal Regar (Department of Textile Technology, Dr B.R. Ambedkar National Institute of Technology, Jalandhar, India)
Sujit Kumar Sinha (Department of Textile Technology, Dr B.R. Ambedkar National Institute of Technology, Jalandhar, India)
Bhavna Choubisa (Department of Textile Technology, Dr B.R. Ambedkar National Institute of Technology, Jalandhar, India)

Research Journal of Textile and Apparel

ISSN: 1560-6074

Article publication date: 24 May 2018

Issue publication date: 24 May 2018

107

Abstract

Purpose

Sewing thread plays an important role in transforming a two-dimensional fabric into three-dimensional garment. Over the years, ring spinning has been dominating the yarn market because of its consistent performance. Eli-Twist spinning system, a new method of yarn manufacture, provides a product with improved mechanical and physical properties than the conventional ring-spun yarn. It is the process of producing a two-ply compact yarn with improved fibre utilisation. The purpose of this paper is to assess the feasibility of using Eli-Twist yarn as a sewing thread and to compare its performance with conventional thread.

Design/methodology/approach

In this study, regular polyester and Indian cotton were used to produce the Eli-Twist and conventional TFO thread. Three different blends (100 per cent polyester, 50/50 polyester/cotton [P/C] and 100 per cent cotton) were taken to produce three different counts (39.4 tex, 29.5 tex and 23.6 tex) from each composition. The hairiness, tenacity, breaking elongation and coefficient of yarn-to-metal friction of threads were tested and a comparative analysis was made. The seam performance of all the threads was judged by seam strength, seam efficiency and seam elongation.

Findings

The results show that the mass irregularity and imperfections are more or less similar for both types of threads. Eli-Twist sewing thread has shown less friction, less hairiness and higher tensile strength. The Eli-Twist sewing thread was found to be better than the conventional two-ply sewing thread. The seam performance parameters, such as seam strength, seam efficiency and seam elongation of the Eli-Twist thread showed significantly improved performance.

Originality/value

The main concern of this study is delineating the performance of the Eli-Twist sewing thread. No study in this regard has been reported so far. The improved physical and mechanical behaviour of the Eli-Twist yarn has prompted to assess its performance as sewing thread.

Keywords

Citation

Regar, M.L., Sinha, S.K. and Choubisa, B. (2018), "Eli-Twist sewing thread – an alternative to conventional thread", Research Journal of Textile and Apparel, Vol. 22 No. 2, pp. 126-137. https://doi.org/10.1108/RJTA-07-2017-0037

Publisher

:

Emerald Publishing Limited

Copyright © 2018, Emerald Publishing Limited

Related articles