Sustainable dyeing of selected natural and synthetic fabrics using waste teak leaves (Tectona Grandis L.)

Abstract

Purpose

This paper aims to extract the dye colourant from teak leaves using different aqueous mediums (Alkaline, Neutral and Acidic); to characterize the dye in terms of yield %; ash content and moisture content; to standardize the conditions of application of dye extracted from teak leaves on selected natural and synthetic fabrics using selected natural and chemical mordants; to assess the colour value (K/S, L*, c*/ h*, a*, b*) and fastness properties of the dyed samples in terms of wash, rub, light and perspiration fastness; and to develop dyed and printed designs using combinations of mordant and extracted dye.

Design/methodology/approach

Stage 1 – Extraction of dye from teak leaves; and characterization of dye: yield% ash content and moisture content. Stage 2 – Preparation of fabrics for dyeing; optimization of mordanting parameters using pre mordanting method followed by post mordanting; and optimization of dyeing parameters. Stage 3 – Testing of dyed fabric – Colour Measurement; K/S L*a*b*/L*c*h*; fastness properties; wash fastness done in the Laundrometer using ISO 2 standard test method; crock fastness done by Crockmeter using AATCC 116–1995 test method; perspiration fastness tested by perspirometer using AATCC 15– 2007 test method; and light fastness assessment in Mercury Bulb Tungsten Filament (MBTF) light fastness tester using AATCC Test Method 16–2004.

Findings

The findings of the study show that waste teak leaves can be used as an effective dye for natural as well as synthetic fabrics giving a wide range of colours on wool, silk and nylon. The maximum relative colour strength of the extracted dye on unmordanted dyed samples was found to be at pH 5 on wool and silk and at pH 7 on nylon. A range of shades was obtained with the use of different mordants. The extracted dye showed moderate to good fastness properties in terms of light, wash, rub and perspiration on wool and silk and excellent on nylon. Fastness properties were found to improve with the application of mordants both as pre and post method. Various combinations of mordants and dye result in obtaining pleasing and harmonious colours which were used aesthetically for printing.

Research limitations/implications

Due to time constrains, extraction in an organic medium could not be done, which could be a further scope for study.

Practical implications

Dyeing using teak leaves is a step towards sustainability and effective waste utilization with promising potential for application on natural as well as synthetic fabrics. Good colour with added properties will provide excellent solutions for eco-friendly methods of dyeing.

Social implications

This paper demonstrates the new possibilities offered by innovative uses of by-products of the timber industry and open good prospects for alternatives to synthetic colourants and new markets for the textile industry. It offers a new tool for the development of slow fashion.

Originality/value

It is a common practice to prune the tree branches to improve wood quality; thus, leaves are easily available as by product from pruning and also from wood harvesting. In the present study, waste teak leaves (Tectona grandis L.) were used for the extraction of dye.

Citation

Agrawal, A. and Chopra, S. (2020), "Sustainable dyeing of selected natural and synthetic fabrics using waste teak leaves (Tectona Grandis L.)", Research Journal of Textile and Apparel, Vol. 24 No. 4, pp. 357-374. https://doi.org/10.1108/RJTA-05-2020-0046