TY  - JOUR
AB  - Purpose This research aims to provide a comparative study of the effect of conventional zinc phosphate (ZP) and zinc aluminium phosphate (ZPA) representing second generation of phosphate-based anticorrosion pigments on the protective performance and physical mechanical properties of a solvent-borne polyurethane (PU) coating.Design/methodology/approach The two pigments were incorporated into the coating at optimum pigment volume concentration. To evaluate the protective performance, electrochemical impedance spectroscopy (EIS) was used. The effect of modification of ZP on the physical–mechanical properties of the coatings was studied through dynamic mechanical thermal analysis. Moreover, Micro Vickers hardness and pull-off tests were used to evaluate the hydrolytic coating degradation.Findings EIS revealed the superior protective function of coatings incorporated with ZPA compared to those formulated with ZP. This behaviour might be attributed to the release of sufficient inhibiting species because of partial dissolving of the anticorrosive pigments when an electrolyte penetrates into the coating. In addition, the effectiveness of modification of ZP on the physical–mechanical properties of coatings was shown.Research limitations/implications As a classical replacement for the toxic chromates, ZP has been widely used in the formulation of protective coatings. However, undesirable inhibitive function of the pigment arising from its low solubility has made modification necessary. Because of the modified solubility, second generation of phosphate-based anticorrosion pigments has been reported to reveal superior performance.Originality/value According to the literature, no report can be found studying the effect of the second generation of phosphate-based anticorrosion pigments on the physical–mechanical properties of PU coatings. The main goal of this work is to study the correlation between physical–mechanical properties and anticorrosion performance of the PU coatings.
VL  - 45
IS  - 6
SN  - 0369-9420
DO  - 10.1108/PRT-09-2015-0084
UR  - https://doi.org/10.1108/PRT-09-2015-0084
AU  - Darvish Abolfazl
AU  - Naderi Reza
AU  - Attar Mohammad Reza Mohammadzadeh
PY  - 2016
Y1  - 2016/01/01
TI  - Improvement in polyurethane coating performance through zinc aluminium phosphate pigment
T2  - Pigment & Resin Technology
PB  - Emerald Group Publishing Limited
SP  - 419
EP  - 425
Y2  - 2024/04/24
ER  -