Wool dyeing with binary mixture of natural dyes

Abstract

Purpose

This paper aims to focus on the absorption behaviour of single and binary mixtures of natural dyes on wool. Natural dyes are multi-components with different structures and properties.

Design/methodology/approach

In this research, the absorption behaviour of single and binary mixtures of natural dyes was investigated on wool fibre. Study was conducted via some natural dyes, including pomegranate peel as a yellow natural dye with tannin, weld as a yellow natural dye without tannin and madder as a red natural dye without tannin. Applied mordant was alum, which was used in the pre-mordant method. Different shades were obtained by varying dye concentration in the binary mixture. The effect of tannin on absorption behaviour of binary mixture of natural dyes was investigated by spectral reflectance and colour parameters of dyed samples measurements.

Findings

Obtained results indicate that tannin affects the absorption behaviour of natural dyes in binary mixtures.

Practical implications

Because natural dyes are multi-components with different structure and properties, the study of compatibility and absorption behaviour of natural dyes in binary mixture on wool is important in applied researches.

Originality/value

The study of compatibility and absorption behaviour of binary mixture of natural dyes on wool is novel.

Citation

Dehnavi, E., Shams-Nateri, A. and Khalili, H. (2016), "Wool dyeing with binary mixture of natural dyes", Pigment & Resin Technology, Vol. 45 No. 1, pp. 52-61. https://doi.org/10.1108/PRT-06-2014-0045