To read this content please select one of the options below:

Enhancement of PMS activation in an UV/ozone process for cyanide degradation: a comprehensive study

Zahra Goodarzvand Chegini (Department of Environmental Engineering, Faculty of natural resources and Environment, Science and Research Branch, Islamic Azad University, Tehran, Iran)
Hessam Hassani (Department of Environmental Engineering, Faculty of natural resources and Environment, Science and Research Branch, Islamic Azad University, Tehran, Iran)
Ali Torabian (Faculty of Environment, University of Tehran, Tehran, Iran)
Seyed Mehdi Borghei (Department of Chemical and Petroleum Engineering, Sharif University of Technology, Tehran, Iran)

Pigment & Resin Technology

ISSN: 0369-9420

Article publication date: 30 July 2020

Issue publication date: 28 August 2020

206

Abstract

Purpose

This paper aims to study peroxymonosulfate (PMS) activation in the ultraviolet (UV)/ozone process for toxic cyanide degradation from aqueous solution by a novel and simple method.

Design/methodology/approach

Photocatalytic degradation of cyanide (CN-) was carried out using a bench-scale photoreactor. Optimization of the UV/ozone process for the highest removal of cyanide was obtained. The effect of parameters such as ozone concentration, PMS concentration, temperature, cations (Cu2+, Co2+ and Fe2+), cyanide concentration, anions (bicarbonate, carbonate, chloride, nitrite, nitrate and sulfate [SO42−]) and scavengers (ethanol [EtOH], humic acid, TBA and NaN3) was investigated for CN- degradation.

Findings

Complete removal of 50 mg/L cyanide was obtained in 4 min in an ozone/UV/PMS process. The cyanide removal increased from 49.3% to 100% by adding the persulfate dosage up to 100 mg/L. The effect of various cations (II) on the cyanide degradation was enhanced in the order Cu2+ > Co2+ > Fe2+. Hydroxyl radical based on different radical quenchers such as salicylic acid proved as the main oxidizing radical for oxidation. The application of ozone/UV/PMS to treat wastewater containing cyanide shows high degradation efficiency.

Research limitations/implications

The ozone/UV/PMS system could be a process for degradation and detoxification of cyanide.

Practical implications

This study provided a simple and effective method for degradation of cyanide from aqueous solution. This method was applicable to protect environment from a huge amount of toxic cyanide wastewater produced by different industrial processes.

Originality/value

The PMS activation is done via a simple and effective method, which is carried out with the ozone/UV system. There are two main innovations. One is that the novel catalytic role of bimetallic ions in the ozone reaction with cyanide and the further decomposition of intermediate products is investigated. The other is that the optimized conditions were obtained for the removal of cyanide as a water contaminant. Furthermore, predominant oxidizing species by PMS activation are identified.

Keywords

Acknowledgements

The authors acknowledge the Department of Environmental Engineering of Azad University for providing necessary research infrastructure and equipment/instruments.

Citation

Goodarzvand Chegini, Z., Hassani, H., Torabian, A. and Borghei, S.M. (2020), "Enhancement of PMS activation in an UV/ozone process for cyanide degradation: a comprehensive study", Pigment & Resin Technology, Vol. 49 No. 5, pp. 409-414. https://doi.org/10.1108/PRT-05-2020-0044

Publisher

:

Emerald Publishing Limited

Copyright © 2020, Emerald Publishing Limited

Related articles