Preparation of new modified antimicrobial alkyd resin based on benzo[b]thiophene derivative as source of polyol for surface coating applications

Abstract

Purpose

This paper aims to prepare new modified alkyd resins and use it as an antimicrobial binder for surface coating applications.

Design/methodology/approach

Various modified alkyd resins were prepared by partial replacement of 3,6-dichloro benzo[b]thiophene-2-carbonyl bis-(2-hydroxy ethyl)-amide as a source of polyol with glycerol and confirmed by acid value, FT-IR, 1H-NMR. The modified alkyd resins were covering a wide range of oil lengths and hydroxyl content (0%, 10%, 20% and 30% excess-OH). The antimicrobial activity of the prepared alkyds was also investigated. The coatings of 60 ± 5 µm thickness were applied to the surface of glass panels and mild steel strips by means of a brush. Physico-mechanical tests, chemical resistance and antimicrobial activities were investigated.

Findings

The obtained results illustrate that the introduction of benzo[b]thiophene derivative as a modifier polyol within the resin structure improved the film performance and enhanced the physico-mechanical characteristics, chemical resistance and the antimicrobial activities.

Practical implications

The modified alkyd resins can be employed as antimicrobial binders in paint compositions for a variety of surfaces, particularly those that are susceptible to a high number of bacteria.

Originality/value

Modified alkyd resins based on antimicrobial heterocyclic compounds have the potential to be promising in the manufacturing of antimicrobial coatings and development of paints, allowing them to function to prevent the spread of microbial infection, which is exactly what the world requires at this time. Also, they can be applied in different substrates for industrial applications.

Citation

Abd El-Wahab, H. and El-Eisawy, R.A. (2023), "Preparation of new modified antimicrobial alkyd resin based on benzo[b]thiophene derivative as source of polyol for surface coating applications", Pigment & Resin Technology, Vol. 52 No. 6, pp. 661-670. https://doi.org/10.1108/PRT-03-2022-0026