To read this content please select one of the options below:

Cu(II)/sodium borohydride-based electrocatalytic system for reduction and dyeing of indigo

Xiaoyan Li (College of Textile and Garment, The Innovation Center of Textile and Garment Technology, Hebei University of Science and Technology, Shijiazhuang, China)
Zhihui Zhang (Hebei University of Science and Technology, Shijiazhuang, China)
Jiming Yao (College of Textile and Garment, Hebei University of Science and Technology, Shijiazhuang, China)
MengQian Wang (College of Textile and Garment, Hebei University of Science and Technology, Shijiazhuang, China)
Na Yang (Hebei University of Science and Technology, Shijiazhuang, China)

Pigment & Resin Technology

ISSN: 0369-9420

Article publication date: 12 July 2021

Issue publication date: 24 March 2022

97

Abstract

Purpose

To improve the problems as the heavy burden of sewage treatment and environmental pollution caused by the traditional sodium hydrosulfite reduction dyeing of indigo, this study aims to carry out the direct electrochemical reduction dyeing for indigo with the eco-friendly Cu(II)/sodium borohydride reduction system under normal temperature and pressure conditions.

Design/methodology/approach

The electrochemical behavior of Cu(II)/sodium borohydride reduction system was investigated by cyclic voltammetry. And, the dyeing performance of the Cu(II)/sodium borohydride reduction system was developed by optimizing the concentration of copper sulfate in the anode electrolyte, applied voltage and reduction time via single-factor and orthogonal integrated analysis.

Findings

The dyeing performance of the Cu(II)/sodium borohydride reduction system is superior to that of the traditional reduction dyeing with sodium hydrosulfite. In the case of the optimized condition, the soaping fastness and dry/wet rubbing fastness of the dyed fabric in the two reduction dyeing processes were basically comparable, the K/S value of electrocatalytic reduction of indigo by Cu(II)/NaBH4 is 11.81, which is higher than that obtained by traditional sodium hydrosulfite reduction dyeing of indigo.

Originality/value

The innovative electrocatalytic reduction system applied herein uses sodium borohydride as the hydrogen source combined with Cu(II) complex as the catalyst, which can serve as a medium for electron transfer and active the dye molecule to make it easier to be reduced. The electrochemical dyeing strategy presented here provides a new idea to improve the reduction dyeing performance of indigo by sodium borohydride.

Keywords

Acknowledgements

This research was supported by National Natural Science Foundation of China (Grant No. 22005083), Natural Science Foundation for Young Scientists of Hebei Province (Grant No. E2019208319), Scientific Research Project of Colleges for Young Scientists in Hebei Province (Grant No. QN2020235).

Citation

Li, X., Zhang, Z., Yao, J., Wang, M. and Yang, N. (2022), "Cu(II)/sodium borohydride-based electrocatalytic system for reduction and dyeing of indigo", Pigment & Resin Technology, Vol. 51 No. 3, pp. 327-335. https://doi.org/10.1108/PRT-02-2021-0015

Publisher

:

Emerald Publishing Limited

Copyright © 2021, Emerald Publishing Limited

Related articles