TY  - JOUR
AB  - Purpose The purpose of this paper is to adopt the multi-objective optimization technique for identifying a set of optimum abrasive water jet machining (AWJM) parameters to achieve maximum material removal rate (MRR) and minimum surface roughness.Design/methodology/approach Data of a few experiments as per the Taguchi’s orthogonal array are considered for achieving maximum MRR and minimum surface roughness (Ra) of the Inconel718. Analysis of variance is performed to understand the statistical significance of AWJM input process parameters.Findings Empirical relations are developed for MRR and Ra in terms of the AWJM process parameters and demonstrated their adequacy through comparison of test results.Research limitations/implications The signal-to-noise ratio transformation should be applied to take in to account the scatter in the repetition of tests in each test run. But, many researchers have adopted this transformation on a single output response of each test run, which has no added advantage other than additional computational task. This paper explains the impact of insignificant process parameter in selection of optimal process parameters. This paper demands drawbacks and complexity in existing theories prior to use new algorithms.Practical implications Taguchi approach is quite simple and easy to handle optimization problems, which has no practical implications (if it handles properly). There is no necessity to hunt for new algorithms for obtaining solution for multi-objective optimization AWJM process.Originality/value This paper deals with a case study, which demonstrates the simplicity of the Taguchi approach in solving multi-objective optimization problems with a few number of experiments.
VL  - 16
IS  - 2
SN  - 1573-6105
DO  - 10.1108/MMMS-10-2018-0175
UR  - https://doi.org/10.1108/MMMS-10-2018-0175
AU  - B.V. Dharmendra
AU  - Kodali Shyam Prasad
AU  - Boggarapu Nageswara Rao
PY  - 2019
Y1  - 2019/01/01
TI  - Multi-objective optimization for optimum abrasive water jet machining process parameters of Inconel718 adopting the Taguchi approach
T2  - Multidiscipline Modeling in Materials and Structures
PB  - Emerald Publishing Limited
SP  - 306
EP  - 321
Y2  - 2024/09/25
ER  -