Stress intensity factors of multiple axisymmetric interface cracks in an isotropic layer with FGM coating under torsional loading

Abstract

Purpose

The purpose of this paper is to provide a theoretical analysis of the fracture behavior of multiple axisymmetric interface cracks between a homogeneous isotropic layer and its functionally graded material (FGM) coating under torsional loading.

Design/methodology/approach

In this paper, the authors employ the distributed dislocation technique to the stress analysis, an FGM coating-substrate system under torsional loading with multiple axisymmetric cracks consist of annular and penny-shaped cracks. First, with the aid of the Hankel transform, the stress fields in the homogeneous layer and its FGM coating are obtained. The problem is then reduced to a set of singular integral equations with a Cauchy-type singularity. Unknown dislocation density is achieved by numerical solution of these integral equations which are employed to calculate the SIFs.

Findings

From the numerical results, the following key points were observed: first, for two types of the axisymmetric interface cracks, the SIFs decrease with growing in the values of the non-homogeneity. Second, the SIFs increase with increases in interface crack length. Third, the magnitude of the SIFs decreases with increases in the FGM coating thickness. Fourth, the interaction between cracks is an important factor affecting the SIFs of crack tips.

Originality/value

New analytical dislocation solution in an FGM coating-substrate system is developed.

Citation

Tavakoli, A., Pourseifi, M. and Rezaei, S. (2019), "Stress intensity factors of multiple axisymmetric interface cracks in an isotropic layer with FGM coating under torsional loading", Multidiscipline Modeling in Materials and Structures, Vol. 15 No. 6, pp. 1352-1365. https://doi.org/10.1108/MMMS-01-2019-0024