To read this content please select one of the options below:

Field effect transistor with thin AlOxNy film as gate dielectric

Piotr Firek (Department of Microelectronics and Optoelectronics, Warsaw University of Technology, Warszaw, Poland)
Jakub Szarafiński (Department of Microelectronics and Optoelectronics, Warsaw University of Technology, Warszaw, Poland)
Grzegorz Głuszko (Department of Electron Technology, Łukasiewicz Research Network – Institute of Electron Technology, Warsaw, Poland)
Jan Szmidt (Department of Microelectronics and Optoelectronics, Warsaw University of Technology, Warsaw, Poland)

Microelectronics International

ISSN: 1356-5362

Article publication date: 5 March 2020

Issue publication date: 21 May 2020

91

Abstract

Purpose

The purpose of this study is to directly measure and determine the Si/SiO2/AlOxNy interface state density on metal insulator semiconductor field effect transistor (MISFET) structures. The primary advantage of using aluminum oxynitride (AlOxNy) is the perfectly controlled variability of the properties of these layers depending on their stoichiometry, which can be easily controlled by the parameters of the magnetron sputtering process. Therefore, a continuous spectrum of properties can be achieved from the specific values for oxide to the specific ones for nitride, thus opening a wide range of applications in high power, high temperature and high frequency electronics, optics and sensors and even acoustic devices.

Design/methodology/approach

The basic subject of this study is n-channel transistors manufactured using silicon with 50-nm-thick AlOxNy films deposited on a silicon dioxide buffer layer via magnetron sputtering in which the gate dielectric was etched with wet solutions and/or dry plasma mixtures. Furthermore, the output, transfer and charge pumping (CP) characteristics were measured and compared for all modifications of the etching process.

Findings

An electrical measurement of MISFETs with AlOxNy gate dielectrics was conducted to plot the current-voltage and CP characteristics and examine the influence of the etching method on MISFET parameters.

Originality/value

In this report, a flat band and threshold voltage and the density of interface traps were determined to evaluate and improve an AlOxNy-based MISFET performance toward highly sensitive field effect transistors for hydrogen detection by applying a Pd-based nanocrystalline layer. The sensitivity of the detectors was highly correlated with the quality of the etching process of the gate dielectrics.

Keywords

Acknowledgements

This work was supported by The National Centre for Research and Development (Methods and means of protection and defense against high power microwave pulses, Grant no DOB-1-3/1/PS/2014).

Citation

Firek, P., Szarafiński, J., Głuszko, G. and Szmidt, J. (2020), "Field effect transistor with thin AlOxNy film as gate dielectric", Microelectronics International, Vol. 37 No. 2, pp. 103-107. https://doi.org/10.1108/MI-11-2019-0074

Publisher

:

Emerald Publishing Limited

Copyright © 2020, Emerald Publishing Limited

Related articles