TY  - JOUR
AB  - Purpose The purpose of this research work is to design and apply LabVIEW in the area of traffic maintenance and flow, by introducing improvements in the smart city. The objective is to introduce the automated human–machine interface (HMI) – a computer-based graphical user interface (GUI) – for measuring the traffic flow and detecting faults in poles.Design/methodology/approach This research paper is based on the use of LabVIEW for designing the HMI for a traffic system in a smart city. This includes considerable measures that are: smart flow of traffic, violation detection on the signal, fault measurement in the traffic pole, locking down of cars for emergency and measuring parameters inside the cars.Findings In this paper, the GUIs and the required circuitry for making improvements in the infrastructure of traffic systems have been designed and proposed, with their respective required hardware. Several measured conditions have been discussed in detail.Research limitations/implications PJRC Teensy 3.1 has been used because it contains enough general-purpose input–output (GPIO) pins required for monitoring parameters that are used for maintaining the necessary flow of traffic and monitor the proposed study case. A combination of sensors such as infrared, accelerometer, magnetic compass, temperature sensor, current sensors, ultrasonic sensor, fingerprint readers, etc. are used to create a monitoring environment for the application. Using Teensy and LabVIEW, the system costs less and is effective in terms of performance.Practical implications The microprocessor board shields for placing actuators and sensors and for attaching the input/output (I/O) to the LED indicators and display have been designed. A circuitry for scaling voltage, i.e. making sensor readings to read limits, has been designed. A combination of certain sensors, at different signals, will lead to a secure and more durable control of traffic. The proposed applications with its hardware and software cost less, are effective and can be easily used for making the city’s traffic services smart. For alarm levels, the desired alarm level can be set from the front panel for certain conditions from the monitoring station. For this, virtual channels can be created for allowing the operator to set any random value for limits. If the sensor value crosses the alarm value, then the corresponding alarm displays an alert. The system works by using efficient decision-making techniques and stores the data along with the corresponding time of operation, for future decisions.Originality/value This study is an advanced research of its category because it combines the field of electrical engineering, computer science and traffic systems by using LabVIEW.
VL  - 9
IS  - 2
SN  - 2053-4620
DO  - 10.1108/JSTPM-05-2017-0015
UR  - https://doi.org/10.1108/JSTPM-05-2017-0015
AU  - Farooq Aqeel
AU  - Alhalabi Wadee
AU  - Alahmadi Sara M.
PY  - 2017
Y1  - 2017/01/01
TI  - Traffic systems in smart cities using LabVIEW
T2  - Journal of Science and Technology Policy Management
PB  - Emerald Publishing Limited
SP  - 242
EP  - 255
Y2  - 2024/04/26
ER  -