Measuring the status and alignment of maintenance and manufacturing strategies – the development of a new model and diagnostic tool
Journal of Quality in Maintenance Engineering
ISSN: 1355-2511
Article publication date: 21 October 2013
Abstract
Purpose
The purpose of this paper is to outline the development of a new conceptual model and the associated diagnostic tool which can measure the status of maintenance and manufacturing strategies and how well they are linked together.
Design/methodology/approach
The new model was developed in two stages. First, a conceptual framework was produced and then a holistic diagram. From this theoretical model a diagnostic tool was generated. This tool was then verified and tested during an empirical research phase which produced four extensive and detailed case studies. A brief overview of one of the case studies is provided in this paper.
Findings
It was found that the conceptual model provided an accurate representation of the strategic processes and links which should exist in a manufacturing plant. Moreover the diagnostic tool proved a valid and reliable instrument to measure and display this information.
Research limitations/implications
The diagnostic tool provides a snapshot of the status of manufacturing and maintenance strategies which then can be used to benchmark improvements over time. When required the individual questions from the questionnaire can be reverse engineered to provide detailed information for senior managers to carry out corrective action.
Practical implications
The diagnostic tool provides a snapshot of the status of manufacturing and maintenance strategies and furthermore by reverse engineering the individual questions from the questionnaire can provide detailed information for senior managers guiding them towards the key areas where corrective action is needed.
Originality/value
This theoretical and empirical research closes a gap in the literature relating to the linkage between maintenance and manufacturing strategies. It does so by providing a unique and holistic representation of the strategic processes and links which should exist within a manufacturing plant. Moreover the diagnostic tool produced from the model is a convenient audit facility which enables companies to move towards functional coherence.
Keywords
Acknowledgements
The authors would like to thank the Regional Development Agency “One North East” for sponsoring this research as part of the Engineering Fellows Programme. The authors are also indebted to the companies that participated in this research that allowed them access to their premises and staff providing valuable feedback and information.
Citation
Robson, K., MacIntyre, J. and Trimble, R. (2013), "Measuring the status and alignment of maintenance and manufacturing strategies – the development of a new model and diagnostic tool", Journal of Quality in Maintenance Engineering, Vol. 19 No. 4, pp. 381-397. https://doi.org/10.1108/JQME-02-2012-0009
Publisher
:Emerald Group Publishing Limited
Copyright © 2013, Emerald Group Publishing Limited