TY  - JOUR
AB  - Purpose This paper aims to monitor, evaluate and adjust the joint quality of dissimilar friction stir welded AA2024-T3 and AA7075-T6 Al alloys.Design/methodology/approach Taguchi analysis for design of experiments and ANOVA analysis were applied. Tensile test, visual inspection and macro and microstructure investigations were carried out at each welding condition. In addition, the grain size of stir zone and the value of heat input were measured.Findings Using Taguchi analysis, the optimum values of tool rotary speed, welding speed and axial load were 1,200 rpm, 100 mm/min and 1,300 kg, respectively, yielding the maximum tensile strength of the joints of 427 MPa. ANOVA analysis indicated that the most significant parameter on the joint strength is the tool rotary speed, followed by welding speed and axial load, with contributions of 67, 27 and 2 per cent, respectively. Best mixing between Al alloys in the stir zone with no defects was observed at moderate speeds because of proper heat input and grain size, resulting in high strength.Originality/value A relation between structure characteristics of the joint, the process parameters and the joint strength was established to control the joint quality.
VL  - 16
IS  - 2
SN  - 1726-0531
DO  - 10.1108/JEDT-10-2017-0108
UR  - https://doi.org/10.1108/JEDT-10-2017-0108
AU  - Reda Reham
AU  - Saad Mohamed
AU  - Ahmed Mohamed Zaky
AU  - Abd-Elkader Hoda
PY  - 2018
Y1  - 2018/01/01
TI  - Monitoring joint quality: Taguchi approach and structure investigation
T2  - Journal of Engineering, Design and Technology
PB  - Emerald Publishing Limited
SP  - 211
EP  - 232
Y2  - 2024/05/10
ER  -