To read this content please select one of the options below:

Prediction of impact response in construction safety helmet using FEA

Mohammed Rajik Khan (Department of Industrial Design, National Institute of Technology, Rourkela, India)
Atul Sonawane (Department of Industrial Design, National Institute of Technology, Rourkela, India)

Journal of Engineering, Design and Technology

ISSN: 1726-0531

Article publication date: 22 October 2019

Issue publication date: 17 April 2020

285

Abstract

Purpose

This paper aims to present 3D finite element (FE) simulations of impact loading on a construction safety helmet over a headform to improve the ventilation slots profile in helmet design.

Design/methodology/approach

Impact response on headforms in three different studies considering ventilation slots of varied profiles and dimensions in helmets with rectangular elliptical and circular slots is compared and analysed. Head injury criteria (HIC) and safety regulations from past literature have been considered to evaluate the impact responses.

Findings

Simulation results show that a helmet with rectangular ventilation slots achieves a lowest peak impact force of 5941.3 N for a slot area of 170 mm2 as compared to elliptical and circular slots.

Research limitations/implications

Ventilation slots of simple geometry (rectangular, elliptical and circular) have been considered in this work. Other/complex geometry slots can also be chosen to predict its effect during impact response on a helmet–headform model. Biofidelic head–neck FE model can be developed to achieve precise results.

Practical implications

The presented work gives a clear idea to design engineers for the selection of ventilation slot profiles to design a construction safety helmet.

Social implications

Construction safety (CS) helmets are used to reduce injuries on heads of workers at construction sites in the event of free-falling objects. Rectangular ventilation slots in CS helmets as suggested in the work may reduce the risk of injury.

Originality/value

Results are found in good agreement with the past numerical simulation of impact response on a construction safety helmet over a validated biofidelic head FE model.

Keywords

Citation

Khan, M.R. and Sonawane, A. (2020), "Prediction of impact response in construction safety helmet using FEA", Journal of Engineering, Design and Technology, Vol. 18 No. 3, pp. 557-566. https://doi.org/10.1108/JEDT-05-2019-0120

Publisher

:

Emerald Publishing Limited

Copyright © 2019, Emerald Publishing Limited

Related articles