A tool centre point calibration method of a dual-robot NDT system for semi-enclosed workpiece testing

Abstract

Purpose

With the development of materials science and technology, composite workpieces are increasingly used. This paper aims to discuss a non-destructive testing (NDT) solution for semi-enclosed composite workpieces. A dual-robot system with one robot that grips an irregular-shaped ultrasonic probe (tool) is established.

Design/methodology/approach

According to robotics, this paper defines the orientations of the discrete points coordinate frames in trajectory and proposes an orientation constraint rule between the tool coordinate frame and the scanning trajectory. A four-posture calibration method for calibrating the transformation relationship of the irregular-shaped tool frame relative to the robot flange frame is presented in detail.

Findings

Calibration and verification experiments were performed, and good-quality C-scan images were obtained by applying the constraint rule and the calibration method. Experimental results show that the calibration method used to determine the tool centre point (TCP) position is correct, effective and efficient; the TCP orientation constraint rule can ensure the extension pole of the irregular-shaped ultrasonic probe is parallel to the axis of the semi-enclosed cylindrical workpieces; and the ultrasonic transducer axis is perpendicular to the surface of the workpiece.

Originality/value

This paper proposes a constraint method for the posture of an irregular-shaped tool in this scheme. Theoretical foundations for the four-posture calibration method of the irregular-shaped tool for dual-robot-assisted ultrasonic NDT are presented in detail. This strategy has been successfully applied in the NDT experiment of semi-enclosed composite workpieces.

Citation

Guo, C., Xu, C., Xiao, D., Zhang, H. and Hao, J. (2019), "A tool centre point calibration method of a dual-robot NDT system for semi-enclosed workpiece testing", Industrial Robot, Vol. 46 No. 2, pp. 202-210. https://doi.org/10.1108/IR-10-2018-0208