Design and control of a novel all-terrains wearable vehicle

Abstract

Purpose

This paper aims to design and control of a novel compact transportation system called the “wearable vehicle”. The wearable vehicle allows for traversing all types of terrains while transporting one's luggage in a comfortable and efficient manner.

Design/methodology/approach

The proposed design consists of a lower limb exoskeleton carrying two motorized wheels and two free wheels installed alongside its feet. This paper presents a detailed description of the system with its preliminary design and finite element analysis. Moreover, the system has been optimally designed to decrease wearable vehicle’s total weight, consequently leading to a reduction in motor size. Finally, two controllers have been designed to achieve stable operation of the wearable vehicle while walking. A PD controller with gravity compensation has been designed to ensure that the wearable vehicle tracks human motion, while a PID controller has been designed to ensure that the zero moment point is close to the center of the system’s support polygon.

Findings

Experimental tests were carried out to check the wearable vehicle concept. The obtained results prove the feasibility of the proposed wearable vehicle from the design, dynamics and control viewpoints.

Practical implications

This proposed wearable vehicle’s purpose is for traveling faster with less effort than normal walking. When a human comes across a flat open ground, the wearable vehicle can be used as a vehicle. However, when a human enters crowded traffic, an unstructured area or other obstacles like stairs, the vehicle can be switched into walking mode.

Originality/value

The wearable vehicle has seven DOFs exoskeletons, two motorized wheels, two free wheels and a foldable seat. It is used as a vehicle via its motorized and free wheels to travel fast with minimal effort. In addition, the human can switch easily into walking mode, if there is unstructured terrain to be traversed. Furthermore, an illustration of system's mechanisms and main feature parameters are presented to become acquainted with the ultimate benefits of the new system.

Citation

Sayed, B.M., Fanni, M., Raessa, M.S. and Mohamed, A. (2019), "Design and control of a novel all-terrains wearable vehicle", Industrial Robot, Vol. 46 No. 6, pp. 740-762. https://doi.org/10.1108/IR-03-2018-0042