To read this content please select one of the options below:

Effectiveness of multi-gated sequence model for the learning of kinematics and dynamics of an industrial robot

Aditya Singh (Centre of Intelligent Robotics, IIIT Allahabad, Allahabad, India)
Padmakar Pandey (Centre of Intelligent Robotics, IIIT Allahabad, Allahabad, India)
G.C. Nandi (Centre of Intelligent Robotics, IIIT Allahabad, Allahabad, India)

Industrial Robot

ISSN: 0143-991x

Article publication date: 9 December 2020

Issue publication date: 19 March 2021

281

Abstract

Purpose

For efficient trajectory control of industrial robots, a cumbersome computation for inverse kinematics and inverse dynamics is needed, which is usually developed using spatial transformation using Denavit–Hartenberg principle and Lagrangian or Newton–Euler methods, respectively. The model is highly non-linear and needs to deal with uncertainties because of lack of accurate measurement of mechanical parameters, noise and non-inclusion of joint friction, which results in some inaccuracies in predicting accurate torque trajectories. To get a guaranteed closed form solution, the robot designers normally follow Pieper’s recommendation and compromise with the mechanical design. While this may be acceptable for the industrial robots where the aesthetic look is not that important, it is not for humanoid and social robots. To help solve this problem, this study aims to propose an alternative machine learning-based computational approach based on a multi-gated sequence model for finding appropriate mapping between Cartesian space to joint space and motion space to joint torque space.

Design/methodology/approach

First, the authors generate sufficient data required for the sequence model, using forward kinematics and forward dynamics by running N number of nested loops, where N is the number of joints of the robot. Subsequently, to develop a learning-based model based on sequence analysis, the authors propose to use long short-term memory (LSTM) and hence, train an LSTM model, the architecture details of which have been discussed in the paper. To make LSTM learning algorithms perform efficiently, the authors need to detect and eliminate redundant features from the data set, which the authors propose to do using an elegant statistical tool called Pearson coefficient.

Findings

To validate the proposed model, the authors have performed rigorous experiments using both hardware and simulation robots (Baxter/Anukul robot) available in their laboratory and KUKA simulation robot data set made available from Neural Learning for Robotics Laboratory. Through several characteristic plots, it has been shown that a sequence-based LSTM model of deep learning architecture with non-redundant features could help the robots to learn smooth and accurate trajectories more quickly compared to data sets having redundancy. Such data-driven modeling techniques can change the future course of direction of robotics research for solving the classical problems such as trajectory planning and motion planning for manipulating industrial as well as social humanoid robots.

Originality/value

The present investigation involves development of deep learning-based computation model, statistical analyses to eliminate redundant features, data creation from one hardware robot (Anukul) and one simulation robot model (KUKA), rigorously training and testing separately two computational models (specially configured two LSTM models) – one for learning inverse kinematics and one for learning inverse dynamics problem – and comparison of the inverse dynamics model with the state-of-the-art model. Hence, the authors strongly believe that the present paper is compact and complete to get published in a reputed journal so that dissemination of new ideas can benefit the researchers in the area of robotics.

Keywords

Acknowledgements

The authors want to thank Elmar Ruckert and Neural Learning for Robotics Laboratory, Universitat zu Lubeck for providing open access to the data set recorded on KUKA robot.

Citation

Singh, A., Pandey, P. and Nandi, G.C. (2021), "Effectiveness of multi-gated sequence model for the learning of kinematics and dynamics of an industrial robot", Industrial Robot, Vol. 48 No. 1, pp. 62-70. https://doi.org/10.1108/IR-01-2020-0010

Publisher

:

Emerald Publishing Limited

Copyright © 2020, Emerald Publishing Limited

Related articles