On the lubrication performance of journal bearing coupled with the axial movement of journal

Abstract

Purpose

Under the action of many factors, the shaft of the shaft-journal bearing system inevitably moves along the axis direction at work, which will lead to the axial movement of journal in the bearing. However, at present, only the dynamic and squeezing effects caused by the relative rotation and squeezing motion between the journal and the bearing surfaces are considered in the lubrication analysis of misaligned journal bearing and the axial movement of journal in the actual use of bearing is not considered. The purpose of this paper is to analyze the lubrication of journal bearing considering the axial movement of journal.

Design/methodology/approach

Taking the shaft-journal bearing system as the research object, a hydrodynamic lubrication model of journal bearing is established considering the axial movement and misalignment of journal. The finite difference method is used to solve the Reynolds equation for the lubrication analysis.

Findings

The axial movement of journal has a significant influence on the lubrication characteristics of misaligned journal bearing. The larger the misalignment angles of journal or the eccentricity of bearing, the greater the influence of the axial movement of journal on the lubrication performance of bearing. The lower the speed of bearing or the smaller the clearance of bearing, the more significant the influence of the axial movement of journal on the lubrication performance of bearing is.

Originality/value

The influence of the axial movement of journal on the lubrication performance of journal bearing is studied under different misalignment angles of journal, working conditions and clearances of bearing. The results of this paper are helpful to the design and research of the lubrication performance of journal bearing.

Citation

Li, B., Sun, J., Wang, H. and Zhang, X. (2022), "On the lubrication performance of journal bearing coupled with the axial movement of journal", Industrial Lubrication and Tribology, Vol. 74 No. 7, pp. 820-828. https://doi.org/10.1108/ILT-12-2021-0476