Development of special lubricant for the copper belt cold rolling
Abstract
Purpose
Aiming at the high temperature, high speed, high precision and high surface quality of the copper belt cold rolling, the purpose of this paper is to develop a new type of lubricant for cold rolled copper belt.
Design/methodology/approach
The component of the developed oil was determined based on the physical and chemical properties of the base oil and the tribological properties, the oxidation resistance properties, the rust resistance properties, the anti-foam properties, the demulsibility and the other properties of the additives. The orthogonal experiment method was used to determine the optimum adding amount of the additives; finally, the developed oil formulation was determined.
Findings
The physical and chemical experiment results show that the developed oil has a good performance of oil film bearing capacity and oxidation resistance. The simulation of rolling experiment found that the developed oil can significantly reduce rolling pressure and effectively reduce the friction in the process of rolling.
Originality/value
The experimental results show that the developed oil has excellent performance and can meet the requirement of lubrication in the process of cold rolling copper belt.
Keywords
Citation
Huang, F., Deng, F., Li, K.-C. and Qin, K. (2016), "Development of special lubricant for the copper belt cold rolling", Industrial Lubrication and Tribology, Vol. 68 No. 5, pp. 586-590. https://doi.org/10.1108/ILT-09-2015-0126
Publisher
:Emerald Group Publishing Limited
Copyright © 2016, Emerald Group Publishing Limited