Effect of hot rolling process parameters on surface wear of descaling rolls

Abstract

Purpose

The purpose of this study is to explain the effect of slab and roll initial temperatures on the wear characteristics of the surface of hot roll descaling rolls.

Design/methodology/approach

The UMESHMOTION subroutine and the Arbitrary Lagrangian-Eulerian adaptive mesh technique are used to investigate the wear profile of the descale roll surface and to evaluate the effect of the slab and roll’s initial temperature on the wear depth.

Findings

Wear is more pronounced at the edges of the roll-slab contact area and less severe in the roll-body’s central region. A rise in the initial slab temperature from 1,337 K to 1,429 K results in a 67% rise in maximum wear depth and 52% in frictional stress. The peak wear region progressively shifted toward the center of the roll body. A rise in the initial roll temperature from 308.15 K to 673.15 K caused a 46% reduction in maximum wear depth and 73% in frictional stress. The location of the peak wear region remained primarily unchanged.

Originality/value

This study used the UMESHMOTIONI subroutine and the Arbitrary Lagrangian-Eulerian adaptive mesh technique in ABAQUS® to evaluate the quantitative correlation between the wear depth of the descaling roll surfaces and the initial temperatures of the slab and rolls. This study offers valuable insights into improving the wear of descaling roll surfaces.

Peer review

The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-06-2024-0231/

Citation

Zhang, G., Liu, K., Liu, G. and Cao, Z. (2024), "Effect of hot rolling process parameters on surface wear of descaling rolls", Industrial Lubrication and Tribology, Vol. 76 No. 10, pp. 1225-1235. https://doi.org/10.1108/ILT-06-2024-0231