Analysis of mechanical power loss of a helical gear pair based on the starved thermal-elastohydrodynamic lubrication model

Abstract

Purpose

Power loss is an important index to evaluate the transmission performance of a gear pair. In some cases, the starved lubrication exists on the gear contact interface. The purpose of this paper is to reveal the mechanical power loss of a helical gear pair under starved lubrication.

Design/methodology/approach

A starved thermal-elastohydrodynamic lubrication (EHL) model is proposed to evaluate the tribological properties of a helical gear pair. The numerical result has been validated against the published simulation data. Based on the proposed model, the influence of thermal effect, working conditions, inlet oil-supply layer and surface roughness on the mechanical power loss and lubrication performance has been discussed.

Findings

Results show that the thermal effect has a significant effect on the tribological properties of helical gear pair, especially on mechanical power loss. For a specified working condition, there is an optimal oil supply for gear lubrication to obtain the state of full film lubrication. Meanwhile, it reveals that the mechanical power loss increases with the increase of the surface roughness amplitude.

Originality/value

In this paper, a starved thermal-EHL model has been developed for the helical gear pair based on the finite line contact theory. This model can be used to analyze the tribological properties of gear pair from full film lubrication to mixed lubrication. The results can provide the tribological guidance for design of a helical gear pair.

Citation

Liu, M., Xu, P., Zhang, J. and Ding, H. (2020), "Analysis of mechanical power loss of a helical gear pair based on the starved thermal-elastohydrodynamic lubrication model", Industrial Lubrication and Tribology, Vol. 72 No. 3, pp. 333-340. https://doi.org/10.1108/ILT-06-2019-0225