TY  - JOUR
AB  - Purpose This paper aims to develop an electrochemical abrasive jet machining (ECAJM) technology to investigate the surface machining effect of Ti-6Al-4V alloy.Design/methodology/approach First, the ECAJM equipment was set up, and a series of experiments for the surface machining of Ti-6Al-4V alloy was performed.Findings The experimental results show that the flowing abrasives of 0.05 Wt.% can effectively remove the TiO2 oxide film of Ti-6Al-4V alloy surface. In addition, the flowing abrasives produce cutting machining effect on the surface of titanium aluminum alloy, and the oxide film can be removed effectively. For the case of machining pressure of 0.4 Mpa and machining gap of 0.4 mm, the processing efficiency can be achieved up to 20 µm/s.Originality/value Under different machining pressure, the flowing abrasive with high kinetic energy impacting the Ti-6Al-4V alloy surface and the oxide film produced from the electrolytic reaction process can be removed effectively, thereby enhancing the efficiency of electrochemical machining process.
VL  - 70
IS  - 8
SN  - 0036-8792
DO  - 10.1108/ILT-05-2017-0119
UR  - https://doi.org/10.1108/ILT-05-2017-0119
AU  - Tsai Feng Che
AU  - Lee Yann Long
AU  - Yeh Ju Chun
PY  - 2018
Y1  - 2018/01/01
TI  - The technical development of titanium alloy surface process using electrochemical abrasive jet machining
T2  - Industrial Lubrication and Tribology
PB  - Emerald Publishing Limited
SP  - 1545
EP  - 1551
Y2  - 2024/04/19
ER  -