Influence of premixed dual metal sulfides on the tribological performance of copper-free brake friction materials

Abstract

Purpose

The purpose of this study is to deals with the effect of premixed dual metal sulfides (tin disulfide + iron disulfide) as a replacement for antimony trisulfide on the tribological performance of brake friction materials.

Design/methodology/approach

In this study, brake friction materials were developed by using premixed dual metal sulfides as a replacement for antimony trisulfide in the formulation. The brake friction materials were developed in the form of standard brake pads as per the industrial practice. Thermal stability was measured for varying ingredients and developed brake pads using thermogravimetric analysis. The physical, mechanical and thermal properties of the developed brake pads were tested as per the industrial standards. The tribological properties were analyzed using the Chase test as per SAE J661. Worn surface analysis was done using a scanning electron microscope.

Findings

The experimental results indicate that the brake pads filled with premixed dual metal sulfides had good thermal stability, physical, chemical and mechanical properties with stable friction and less wear rate due to better lubrication preventing friction undulations.

Originality/value

This paper explains the influence of premixed dual metal sulfides as a replacement for antimony trisulfide in brake pads formulation to enhance the tribological performance by preventing friction undulations.

Peer review

The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-04-2020-0144/

Citation

R., V., S., M., S., N. and D., L.S. (2021), "Influence of premixed dual metal sulfides on the tribological performance of copper-free brake friction materials", Industrial Lubrication and Tribology, Vol. 73 No. 2, pp. 266-274. https://doi.org/10.1108/ILT-03-2020-0116