Research on the wheel wear of metro vehicles based on the time-varying passenger flow
Industrial Lubrication and Tribology
ISSN: 0036-8792
Article publication date: 8 October 2019
Issue publication date: 22 October 2019
Abstract
Purpose
This study aims to investigate the effect of time-varying passenger flow on the wheel wear of metro vehicles to provide a more accurate model for predicting wheel wear and a new idea for reducing wheel wear.
Design/methodology/approach
Sectional passage flow data were collected from an operational metro line. A wheel wear simulation based on time-varying passenger flow was performed via the SIMPACK software to obtain the worn wheel profile and wear distribution. The simulation involves the following models: vehicle system dynamics model, wheel-track rolling contact model, wheel wear model and variable load application model. Later, the simulation results were compared with those obtained under the traditional constant load condition and the measured wear data.
Findings
For different distances traveled by the metro vehicle, the simulated wheel profile and wear distribution under the variable load remained closer to the measurements than those obtained under the constant load. As the distance traveled increased, the depth and position of maximum wear and wear growth rate under the variable load tended to approach the corresponding measured values. In contrast, the simulation results under the constant load differed greatly from the measured values. This suggests that the model accuracy under the variable load was significantly improved and the simulation results can offer a more accurate basis for wear prediction.
Practical implications
These results will help to predict wheel wear more accurately and provide a new idea for simulating wheel wear of metro vehicles. At the same time, measures for reducing wheel wear were discussed from the perspective of passenger flow changes.
Originality/value
Existing research on the wheel wear of metro vehicles is mainly based on the constant load condition, which is quite different from the variable load condition where the passenger flow in real vehicles varies over time. A method of simulating wheel wear based on time-varying load is proposed in this paper. The proposed method shows a great improvement in simulation accuracy compared to traditional methods and can provide a more accurate basis for wear prediction and wheel repair.
Keywords
Acknowledgements
Supported by National Natural Science Foundation of China (51605023, 51775031); Fundamental Research Funds for Beijing Universities of Beijing University of City Engineering and Architecture (X18207, X18140).
Citation
Zhu, A., Fu, C., Yang, J., Li, Q., Zhang, J., Li, H. and Zhang, K. (2019), "Research on the wheel wear of metro vehicles based on the time-varying passenger flow", Industrial Lubrication and Tribology, Vol. 71 No. 9, pp. 1038-1046. https://doi.org/10.1108/ILT-01-2019-0014
Publisher
:Emerald Publishing Limited
Copyright © 2019, Emerald Publishing Limited