Demarcation boundary between region dominated by elastohydrodynamic lubrication and that by the surface force action for different elliptical ratios

Abstract

Purpose

This paper aims to investigate the effect of changing speed of the entraining motion on the formation of ultra-thin lubricating films under different elliptical ratios. The ellipticity parameter (K) varied from 1 (a ball-on-plate configuration) to 6 (a configuration approaching line contact). The influence of the ellipticity parameters, the dimensionless speed and the effects of surface forces on the formation of the minimum film thickness has been demonstrated. The demarcation boundary between region dominated by elastohydrodynamic lubrication (EHL) and that by the surface force action has been demonstrated for different elliptical ratios.

Design/methodology/approach

The numerical solution has been carried out, using the Newton–Raphson iteration technique, applied for the convergence of the hydrodynamic pressure. The film thickness and pressure distribution are obtained by simultaneous solution of the Reynolds’ equation, the elastic deformation (caused by hydrodynamic pressure, surface force of solvation and Van der Waals force) and the load balance equation. The operating conditions, load and speed of entraining motion, promote formation of ultra-thin films that are formed under the combined action of EHL, surface contact force of solvation and molecular interactions due to presence of Van der Waals force.

Findings

The paper provides insights about the transition between region dominated by EHL and that by the surface force action for changing ellipticity ratio (K) from 1 (a ball-on-plate configuration) to 6 (a configuration approaching line contact).

Originality/value

This paper fulfils an identified need to study the effect of changing ellipticity ratio on the formation of ultra-thin films that are formed under the combined action of EHL, surface contact force of solvation and molecular interactions due to presence of Van der Waals force.

Citation

Abd Al-Samieh, M. (2017), "Demarcation boundary between region dominated by elastohydrodynamic lubrication and that by the surface force action for different elliptical ratios", Industrial Lubrication and Tribology, Vol. 69 No. 2, pp. 215-224. https://doi.org/10.1108/ILT-01-2016-0003